I ran 4 gauge for power, only reused the D-PlugDo not reuse your existing power wires. You need a dedicated 4 gauge wire from the alternator power post to the + side of the starter solenoid with a 125 inline amp. The only wire to re use off that plug is the stator wire. You will use the D shaped regulator plug and wires. Do a search in the technical archives and you will find a write up
I got 2 4Guage cables, fuse and fuse holder from Napa for under $30, just need to know which wire the Stator should be hooked to.I used a PA Performance power wire kit. They have a few different lengths, I can't remember which one I used.
http://www.paperformance.com/scripts/prodList.asp?idCategory=20
I just was told the AC comes on when in Mix or Defrost, didn't know that before..........so hopefully my problems are solved.OK, found out from another thread how to wire the thing properly but I still have my AC compressor kicking on when I turn the heat selector to mix or defrost. Any idea why this is happening?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?