• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-

4.0 is indeed an interference engine...

  • Thread starter Thread starter tarafied
  • Start date Start date Jun 9, 2022

tarafied

New Member
Oct 2, 2011
6
0
1
Russellville, KY
Jun 9, 2022
#1
  • Jun 9, 2022
  • #1
So my 2007 4.0 has been acting weird for years. Giving me intermittent CEL and misfire codes. Several years ago the harmonic balancer came apart and I replaced it with a auto parts store brand and never gave it much more thought. However, after chasing the fault codes and taking it to a shop, it has had multiple coil packs, plugs, wires, fuel filters, injectors and all kinds of sensors changed never actually fixing it. One day it just started running really really bad making a lot of clatter and died.
Compression test showed it had no compression so I figured it was a timing chain issue. Well it turns out that cheap balancer actually broke, split at the crank and must have been moving around causing the error codes. When it finally completely failed it had taken the lower sprocket with it. In doing so it took a few valves and pistons on the way out. Needless to say the 4.0 is now basically a boat anchor. It needs 6 pistons, a crank one head and all the valves in the other head, not to mention the timing set, gaskets, etc. It only had 97,000 on it and should have run a long time as well I as cared for it.
I am glad to finally understand the problem but t's going to be an expensive fix...





 
Reactions: 7991LXnSHO

Olivethefet

I will own your nuts! LOL
5 Year Member
May 17, 2018
2,596
1,790
143
Enterprise AL
Jun 9, 2022
#2
  • Jun 9, 2022
  • #2
Boo! Sorry for that.
 

cbxer55

Active Member
Jan 25, 2020
318
70
38
Oklahoma
Jul 1, 2022
#3
  • Jul 1, 2022
  • #3
Wow! My 2007 has a little over 126,000 so far. I was getting the CEL and mis fire codes. Funny thing, while in the shop getting the transmission fixed, my friend suggested replacing the foot pedal, since he suspected the position sensor on it was bad. So, he put a new pedal set up in, installed a new throttle body with new servo motor, and haven't has a single issue with it ever since.

I was also getting a random zero oil pressure light and warning. And the motor never stopped running when it happened. That also went away with the new parts.
 
You must log in or register to reply here.

Similar threads

Engine Random Misfire at idle.
  • Gulftown980x
  • Jul 29, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
223
SN95 4.6L Mustang Tech Jul 31, 2026
squeak93
H
Ongoing Battle With Hydraulic Lifters
  • hailer06
  • Jun 8, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
314
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 9, 2026
Noobz347
Hard to start when engine is cold
  • 86_Capri
  • Mar 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
S
Timing chain, guides and tensioner installation (Possible orientation in Intake Stroke)
  • StallionMax
  • Sep 21, 2025
  • SN95 4.6L Mustang Tech
Replies
2
Views
401
SN95 4.6L Mustang Tech Sep 24, 2025
StallionMax
S
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
946
1965 - 1973 Classic Mustangs -General/Talk- Jun 20, 2026
gray owl
G
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?