• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

4.10s and loudness

  • Thread starter Thread starter sixstringthing
  • Start date Start date Sep 22, 2004
S

sixstringthing

New Member
Aug 11, 2003
297
0
0
Sep 22, 2004
#1
  • Sep 22, 2004
  • #1
There's all these threads on 4.10s and gas mileage etc.... I could care less about the mileage, engine wear or those other issues. The one thing that scares the hell out of me is the noise at highway speeds. I have an 02 GT 5spd with a Prochamber and Flows, normally cruise around 75. I tried going on the highway in 4th and cruising at around 2500 RPM's..... geez it was pretty damn loud, your not exactly in the drone zone (although mine pretty much drones all the way from 2k to 3k it just varies in loudness) but the engine is like twice as loud and it felt SO stressed that I just had to switch to 5th after a few minutes.
I don't know if theres actually a difference in loudness in 4th gear at 2500 RPM then in 5th gear at 2500 RPM.... I would think not? But wow if that is an indication of how loud it will be/feel I don't know if I can take it.... if it wasn't for that I would already have them.

p.s. my car is NEVER raced nor will it ever be, it's a daily driver I just like speed.
 

Cobra Jay

Member
Apr 7, 2004
889
0
16
Motor City
Sep 22, 2004
#2
  • Sep 22, 2004
  • #2
The only thing that's going to make your car any louder (other than the exhaust) is RPM's. Obviously, the higher you rev it, the louder it's going to get. I usually cruise on the e-way at 75 in 5th and it's not that much more noticeably loud than with the 3.27's. It's slightly louder now that I have an o/r h pipe.
 
L

laynlow200

New Member
Sep 2, 2004
26
0
0
Sep 23, 2004
#3
  • Sep 23, 2004
  • #3
Another thing to keep in mind is there will be a difference between 4th and 5th at 2500rpm's cause 5th gear is overdrive.
 
S

sixstringthing

New Member
Aug 11, 2003
297
0
0
Sep 23, 2004
#4
  • Sep 23, 2004
  • #4
Oh really? See that's what I was wondering when I was driving in 4th at 2500... hmm.
 

uk01gt

New Member
Apr 10, 2004
37
0
0
England
Sep 23, 2004
#5
  • Sep 23, 2004
  • #5
laynlow200 said:
Another thing to keep in mind is there will be a difference between 4th and 5th at 2500rpm's cause 5th gear is overdrive.
Click to expand...

There will be a difference in speed, but revs is revs. Surely the sound is the same at the same revs whatever the gear?
 

huskerpower02

Member
Aug 21, 2003
770
0
16
KS
Sep 23, 2004
#6
  • Sep 23, 2004
  • #6
i did a write up on this. click the link and read numbers 5 and/or 9.

http://forums.stangnet.com/showthread.php?p=4554280#post4554280
 
You must log in or register to reply here.

Similar threads

A
2001 Mustang GT, scorched metal smell and noise from trans/diff?
  • AndyE2255
  • Dec 1, 2025
  • SN95 4.6L Mustang Tech
Replies
4
Views
469
SN95 4.6L Mustang Tech Dec 28, 2025
gkomo
is my car dead
  • kenzo0315
  • Jun 30, 2025
  • SN95 V6 Mustang Tech
  • 2
Replies
29
Views
1K
SN95 V6 Mustang Tech Jul 8, 2025
kenzo0315
S
Engine Stalls when downshifting/coasting
  • Scott_S
  • Nov 5, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
742
Fox 5.0 Mustang Tech Nov 6, 2025
Mustang5L5
B
Questions About T5 Manual
  • Blackout67
  • Apr 13, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
10
Views
618
1996 - 2004 SN95 Mustang -General/Talk- Apr 22, 2025
89ripper
X
VE Table Not Dialed? Send Me Your Datalog.
  • X-cam34
  • Feb 8, 2026
  • Digital Self-tuning Forum
  • 2 3
Replies
49
Views
1K
Digital Self-tuning Forum May 1, 2026
X-cam34
X
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?