4 banger tranny in a 5.0?

Kabuki_notch

Founding Member

Nov 19, 2001

670

394

113

Rochester, NY

Dec 13, 2004

#1

• Dec 13, 2004

• #1

what are your thoughts on this i have more than 70% of my parts for my aod-t5 swap there is a guy locally running a 4 cyl tranny in a mid 12's car with no problems personally i think thats a little iffy. im looking for a tranny and have access to a 4cylinder tranny out of a turbo coupe what should i do?

 

Boss_Mustang_69

New Member

Oct 6, 2004

34

0

0

BC, Canada

Dec 13, 2004

#2

• Dec 13, 2004

• #2

It's sorta hit and miss, I know a couple of guys that have run those tranny's with no problems. Sometimes they are better than a 5.0 t5 because they havent had the piss run out of them yet.

 

Mike86Stang

Advanced Member

Apr 11, 2000

10,296

0

77

Red Lion, PA

Dec 13, 2004

#3

• Dec 13, 2004

• #3

I did the swap on an 86GT that I sold, so far it's been holding up fine. So far it's been since June? The one thing I didn't like was that I had to put an old style bronze bushing in the crank....

Mike

 

giddyup306

Founding Member

Oct 22, 2002

3,041

2

59

Dec 13, 2004

#4

• Dec 13, 2004

• #4

I know a guy that put one behind a 347. All I know is that to this day it could be still in working condition. While the rest of us are complaining about how weak the t5 is and are upgrading to TKO's your going to a 4 banger tranny lol. If ya go with it keep me posted.

 

Kabuki_notch

Founding Member

Nov 19, 2001

670

394

113

Rochester, NY

Dec 13, 2004

#5

• Dec 13, 2004

• #5

yeah thats what ive been thinking MSTANG the swap then is almost the same as if i would be using a t5 then correct? the tranny is in my buddys 89GT which was an automatic he's going to a c4 and is getting rid of the tranny i can get it cheap as well. plus i need to keep in mind i will be running 5-6pounds of boost dont know if those trannys can handle that

 

Mike86Stang

Advanced Member

Apr 11, 2000

10,296

0

77

Red Lion, PA

Dec 13, 2004

#6

• Dec 13, 2004

• #6

The only thing I would be concerned about is there ARE slight diffrences in the pilot bearing shaft diameter so make sure you address this depending on which trans you use.

here's my old thread if it's any help
http://forums.stangnet.com/showthread.php?t=473645&highlight=tranny

 

84blkstang

Member

Jun 4, 2003

544

1

18

Springfield MO

Dec 13, 2004

#7

• Dec 13, 2004

• #7

I am running one right now and it shifts and runs fine and i do run the piss out of it somtimes and it has taken it like a champ.

 

4dStang

Banned

Oct 23, 2002

718

1

0

Near St Louis, Missouri

Dec 13, 2004

#8

• Dec 13, 2004

• #8

84blkstang said:

I am running one right now and it shifts and runs fine and i do run the piss out of it somtimes and it has taken it like a champ.

Click to expand...

I know those 4 banger tranny's have a different gear ratio. I think first is a little lower (could be good for gettin outa the hole) but otherwise, they are the same tranny. I don't think they put weaker steel in the gears, shafts, or synchros, right? Why would Ford do that?

I found a full 4 banger conversion pile of parts in Utah while I was back home for $300 at a JY. I thought about buying it just to sell for a bundle. The bell, clutch flywheel and pilot are the only difference.

Throw that 4 banger tranny in and try it. Worst case you have to change it like most of us t-5'ers have to do every so often.

 

Ford_Racing

New Member

Mar 21, 2004

55

0

0

Portland Texas

Dec 13, 2004

#9

• Dec 13, 2004

• #9

The 4 banger tranny DOES have smaller ratio gears in them that are great for racing applications. The input shaft is smaller than a 5.0 T5 tranny. It will work great for a while is what I have been told. But like any stock T5 tranny, it's a ticking timebomb.

 

T

txplayboy001

New Member

Nov 30, 2004

47

0

0

Dec 14, 2004

#10

• Dec 14, 2004

• #10

He is correct. The imput shaft is a bit smaller, which in my opinion could be a problem. Smaller is weaker. If you explode that imput shaft you might end up with some problems that you really don't want to think about.

 

2

2002BLGT

Well-Known Member

Dec 18, 2003

2,945

4

59

Bedford VA

Dec 14, 2004

#11

• Dec 14, 2004

• #11

you just use a ranger pilot bushing/bearing right ???

 

_jb_

New Member

Mar 4, 2004

808

0

0

Michigan, Berrien County

Dec 14, 2004

#12

• Dec 14, 2004

• #12

Ford_Racing said:

The 4 banger tranny DOES have smaller ratio gears in them that are great for racing applications.

Click to expand...

Wow, looks like the guy I bought my car from knew something. He was telling me about that the day I bought my car. I didn't know to trust him or not, because I don't know if he is the one that messed my car up or not.