4 lug Y2K cobras

[Dean85GT]

They make them dont they? Any leads?

 

[carbed87]

good question, i like the modest look of them.

 

[Dean85GT]

Im really diggin them on my car right now

 

[stykthyn]

if they are out there ebay'd have them

 

[Henceforward]

17"

http://customwheelsmarket.com/cwm-27078252red.html

 

[Dean85GT]

ack those dont look good at all

 

[Flavadave4]

My buddy had a set on his white GT and they looked awfull........

 

[cobra2798]

I wish they made 98 cobras in 4 lug. The previous owner had them on my car but took them off and put the pony's and 4 lug back on and put the 5 lug conversion and 98 cobras on his notch, bastard!

 

[25thmustang]

Those wheels in 4 lug just never look right. Then when you take an 18" wheel and design it in 17" it just looks worse. Personally the 03+ Cobras are really one of the only 5 spoke 4-lug wheels that look great!

 

[tunedin302]

Dean - those look fantastic

 

[Strype]

If they were 4 lug 18's I think they'd look great... as for those?

 

[9 Deuce GT]

If you want to run 5 lug wheels, switch to 5 lug. It's really cheap if you keep your stock brake system. I can't believe anyone even buys 4 lug wheels anymore.

Get 2 front rotors from a '90 Lincoln mK VII and Ranger axles and drums. If you don't want to go to the junk yard and get the axles, just buy the kit. $200 for axles and drums is cheap. The fronts will cost you $80.

 

[Snikt89GT]

If you want to run 5 lug wheels, switch to 5 lug. It's really cheap if you keep your stock brake system. I can't believe anyone even buys 4 lug wheels anymore.

Get 2 front rotors from a '90 Lincoln mK VII and Ranger axles and drums. If you don't want to go to the junk yard and get the axles, just buy the kit. $200 for axles and drums is cheap. The fronts will cost you $80.

except for the lincoln rotors part. Go with a real 94-95 setup in front at least. You can't run 98 cobras with lincoln rotors