4000 CFM dodge Viper fan install Pics & info

[UnderPressureGT]

Joe

check out www.zirgo.com
3.3 inchehs thick
16 inch
3300 cfm
can be had cheap on ebay.

http://cgi.ebay.com/ebaymotors/ws/e...tem=4541834729&category=34201&sspagename=WDVW here we go.. found one...thankss

 

[Stang8URMPRT]

I like the blue wire loom

 

[94GTLaserRC]

That looks awesome...My car really cooks up with my bling stuff in the summer. With my Xenon from bumper, I get a lot of air flow blockage, so even with my HS fan on at 176 and a Fluidyne, I see high temps on the hwy in the summer.. I think I may look into this if I do an engine upgrade next year.
RC

 

[Killer50stang]

I ran a zirgo on the front of my radiator and a haydene on the back. Works like a charm.

 

[94GTLaserRC]

Revived...want to do this soon and need more info....doing the engine upgrade now

RC

 

[ponyboy19]

what more do you need? Only thing I will say is I tore off the dcc controler, even when the controller is on full blast, the fan will run faster with a direct 12v sorce, so the controller is holding the fan back a little. It may not be an issue with your set up and if it cools then great, mine did, but It is something I found while messing with it.

 

[94GTLaserRC]

what more do you need? Only thing I will say is I tore off the dcc controler, even when the controller is on full blast, the fan will run faster with a direct 12v sorce, so the controller is holding the fan back a little. It may not be an issue with your set up and if it cools then great, mine did, but It is something I found while messing with it.

Sorry...dont need more on the process, just on obtaining the parts, since this was a few years old, and havent been able to find this stuff on the net after a brief, quick search...Wanted to find some updates on pricing and availability.

Thanks
RC

 

[Stopsign32v]

ponyboy19 not to talk this off topic but what intake is that you are running? Also what valve covers and how did you get the fittings in the covers?

 

[ponyboy19]

Sorry...dont need more on the process, just on obtaining the parts, since this was a few years old, and havent been able to find this stuff on the net after a brief, quick search...Wanted to find some updates on pricing and availability.

Thanks
RC

I know it's a dealer item.. At the time I paid something like 185 from Diablosport, and the dodge dealer wanted around 250 ish. I think they are more now. I wouldn't pay more than a couple hundred bucks for it. I've sinced pulled the fan since it wouldn't fit with my YSI and now use a 31x19 rad with the ramchargers/intrepid dual fans. Works perfect as well. I through the Viper on my 92 with a stock radiator, it was having cooling issues, but the viper fan cured that in short order

ponyboy19 not to talk this off topic but what intake is that you are running? Also what valve covers and how did you get the fittings in the covers?

It's a Vic Jr spyder from CHP with the 90mm elbow, the valve covers are from Bennett Racing and are baffled with -12an aluminum fittings that I tig welded over top of them. Fittings can be bought from Summit or Jegs, I doubt the V/Covers would ever fit a standard EFI intake without a huge spacer.

 

[Sicarius428]

I have also installed the viper fan and it is great. As said before the fan will contact the radiatior since the shroud is a bit shallow for a typical raidator. I used some aluminium channel from OSH and built a spacer for the fan to clear. It works great. I havn't had any problems with my DC controler/viper fan/Griffin radiator/stuarts waterpump setup. Ponyboy thank you for the inspiration. Definately a very efficient and clean setiup.
Kevin

 

[94GTLaserRC]

So is there a "clear cut" verdict on where to buy this fan? Summit has the 1st gen one, but it's 2900 cfm, I dont know if it's better than stock. Anyone have pics in there car?

RC