4000 CFM dodge Viper fan install Pics & info

UnderPressureGT

New Member

Dec 31, 2002

2,285

0

0

TR- Jersey Shore

Apr 10, 2005

#41

• Apr 10, 2005

• #41

GroverDill said:

Joe

check out www.zirgo.com
3.3 inchehs thick
16 inch
3300 cfm
can be had cheap on ebay.

Click to expand...

http://cgi.ebay.com/ebaymotors/ws/e...tem=4541834729&category=34201&sspagename=WDVW here we go.. found one...thankss

 

Stang8URMPRT

Active Member

Dec 28, 2003

1,100

1

38

Daytona Beach, FL

Apr 11, 2005

#42

• Apr 11, 2005

• #42

90NotchBack said:

I like the blue wire loom

Click to expand...

 

94GTLaserRC

Squint as you approach, lest you be blinded by my

15 Year Member

May 7, 2002

11,178

13

89

Ernan Says "here it comes... dushbag"

Feb 9, 2006

#43

• Feb 9, 2006

• #43

That looks awesome...My car really cooks up with my bling stuff in the summer. With my Xenon from bumper, I get a lot of air flow blockage, so even with my HS fan on at 176 and a Fluidyne, I see high temps on the hwy in the summer.. I think I may look into this if I do an engine upgrade next year.
RC

 

Killer50stang

New Member

May 11, 2004

632

0

0

Feb 10, 2006

#44

• Feb 10, 2006

• #44

I ran a zirgo on the front of my radiator and a haydene on the back. Works like a charm.

 

94GTLaserRC

Squint as you approach, lest you be blinded by my

15 Year Member

May 7, 2002

11,178

13

89

Ernan Says "here it comes... dushbag"

May 16, 2008

#45

• May 16, 2008

• #45

Revived...want to do this soon and need more info....doing the engine upgrade now

RC

 

ponyboy19

Founding Member

May 24, 2000

1,640

0

36

May 16, 2008

#46

• May 16, 2008

• #46

what more do you need? Only thing I will say is I tore off the dcc controler, even when the controller is on full blast, the fan will run faster with a direct 12v sorce, so the controller is holding the fan back a little. It may not be an issue with your set up and if it cools then great, mine did, but It is something I found while messing with it.

 

94GTLaserRC

Squint as you approach, lest you be blinded by my

15 Year Member

May 7, 2002

11,178

13

89

Ernan Says "here it comes... dushbag"

May 16, 2008

#47

• May 16, 2008

• #47

ponyboy19 said:

what more do you need? Only thing I will say is I tore off the dcc controler, even when the controller is on full blast, the fan will run faster with a direct 12v sorce, so the controller is holding the fan back a little. It may not be an issue with your set up and if it cools then great, mine did, but It is something I found while messing with it.

Click to expand...

Sorry...dont need more on the process, just on obtaining the parts, since this was a few years old, and havent been able to find this stuff on the net after a brief, quick search...Wanted to find some updates on pricing and availability.

Thanks
RC

 

S

Stopsign32v

Member

May 18, 2008

394

0

16

Gville, SC

May 19, 2008

#48

• May 19, 2008

• #48

ponyboy19 not to talk this off topic but what intake is that you are running? Also what valve covers and how did you get the fittings in the covers?

 

ponyboy19

Founding Member

May 24, 2000

1,640

0

36

May 20, 2008

#49

• May 20, 2008

• #49

94GTLaserRC said:

Sorry...dont need more on the process, just on obtaining the parts, since this was a few years old, and havent been able to find this stuff on the net after a brief, quick search...Wanted to find some updates on pricing and availability.

Thanks
RC

Click to expand...

I know it's a dealer item.. At the time I paid something like 185 from Diablosport, and the dodge dealer wanted around 250 ish. I think they are more now. I wouldn't pay more than a couple hundred bucks for it. I've sinced pulled the fan since it wouldn't fit with my YSI and now use a 31x19 rad with the ramchargers/intrepid dual fans. Works perfect as well. I through the Viper on my 92 with a stock radiator, it was having cooling issues, but the viper fan cured that in short order

Stopsign32v said:

ponyboy19 not to talk this off topic but what intake is that you are running? Also what valve covers and how did you get the fittings in the covers?

Click to expand...

It's a Vic Jr spyder from CHP with the 90mm elbow, the valve covers are from Bennett Racing and are baffled with -12an aluminum fittings that I tig welded over top of them. Fittings can be bought from Summit or Jegs, I doubt the V/Covers would ever fit a standard EFI intake without a huge spacer.

 

S

Sicarius428

Active Member

Jan 6, 2004

2,085

5

49

May 20, 2008

#50

• May 20, 2008

• #50

I have also installed the viper fan and it is great. As said before the fan will contact the radiatior since the shroud is a bit shallow for a typical raidator. I used some aluminium channel from OSH and built a spacer for the fan to clear. It works great. I havn't had any problems with my DC controler/viper fan/Griffin radiator/stuarts waterpump setup. Ponyboy thank you for the inspiration. Definately a very efficient and clean setiup.
Kevin

 

94GTLaserRC

Squint as you approach, lest you be blinded by my

15 Year Member

May 7, 2002

11,178

13

89

Ernan Says "here it comes... dushbag"

May 20, 2008

#51

• May 20, 2008

• #51

So is there a "clear cut" verdict on where to buy this fan? Summit has the 1st gen one, but it's 2900 cfm, I dont know if it's better than stock. Anyone have pics in there car?

RC