450 rwhp

[snoboardcore]

Hey guys i currently am running the b303 cam with my set up(in my sig) which is .480/.480 284/284 224/224 @.50 by switching to this wolverine cam .491/.509 212/222 107/117 @.50 will i be making more hp? and if so approximately how much? Also i am going to be upgrading to an 80mm maf with 42lb injectors and be running around 6-7lbs of boost. will this put me around 450rwhp? Because the current setup is at 357 rwhp.

 

[IntenseBlue]

Go with a TFS 1. The Wolverine, if your stuck on it, then get it, b/c it will make more power than the B-cam.

 

[aleborjas]

a supercharger cam need to have more exhaust lift and duration than intake and more centerlobe 112 up i would like more 114 i would get stage 1 TFS or comp cams 284 for supercharger part#35-306-8 or XE274HR.

 

[snoboardcore]

well i already have the wolverine cam so i am going to installing that. As long as i can hit 450rwhp with that cam i will be more than pleased.

 

[84blkstang]

The B cam is made for N/A applications I think because it has too much or not enough valve overlap, i dont remember off the top of my head, Comp makes a good cam and so does trickflow, but if you are set on that one cam than go for it.