4r70w help needed

Yes. Work with it some. Loosen the nut and while under the car keep messing with it. When i installed mine with the B&M Hammer Shifter it did the same

It is very easy to put the fork into the wrong spot on the manual valve. Is the transmission in Park when the shifter is in P? If you shift it in to 1, is it in 1? Similarly, if you shift it into 2, is it in 2? Start the car and shift into each gear and you will feel whether it is in the correct gear. I know it's messy but I suggest that you drop the pan, check it, and then you can rule it out as a possible problem. And check the torque of the v/b bolts. They can back out and this will cause some shifting sloppiness (or other problems) as the fluid goes where it is not supposed to go.

HTH,

Chris

DAKDOG99:

Thanks for the update. Sorry that I overlooked checking the level as a first step. DOH!

Cheers,

Chris