Found a cheap s trim that was previously on a Lincoln lsc 5.0. Just curious if anyone knows if it will bolt right up to my 88 notch with out any modifications? I would imagine its all the same brackets etc. as the standard 87-93 5.0 v1 s trim. Thanks in advance
I was under the impression those were non-ho motors with the intakes facing the drivers side. May be way off base here but if that's the case the brackets and piping may be wrong
I was under the impression those were non-ho motors with the intakes facing the drivers side. May be way off base here but if that's the case the brackets and piping may be wrong
I swore the same, except that they were HO engines. It's been probably fifteen years since I've had the opportunity to look under the hood of one though.
i was under the hood of a 90 lincoln and it was not a ho although it was a 5.0. intake was reversed. apparently the 88-92 Lincoln MK7 HO 5.0 will work though for alot of direct swap parts.
my bad i was arm deep in a 1990 5.0 crown vic... not the lincoln. but the mk7 is an ho engine.
Hey guys do you know if 87-93 weatherstripping and window belt line will fit a 84 model? Sorry if its a dumb question I didnt want to make a thread for it......Thanks
Hey guys do you know if 87-93 weatherstripping and window belt line will fit a 84 model? Sorry if its a dumb question I didnt want to make a thread for it......Thanks
This is the wroooong thread, bud.
It's ok to make a thread for simple questions. It's done all the time. One little question can end up making a big discussion so go ahead, you won't be hurtin' anybody. Put it in the Talk section, that's probably where it should be posted.
so I should be in the clear as long as the intake was facing the right way/it came off of a h.o. motor? I cant find a Lsc specific kit from vortech anywhere so I'm guessing it is
an original foxbody kit.
so I should be in the clear as long as the intake was facing the right way/it came off of a h.o. motor? I cant find a Lsc specific kit from vortech anywhere so I'm guessing it is
an original foxbody kit.
I've had 3 of these cars...Even did a 351 swap on one. The 88-92 are H.O. 225hp roller motors. The 84-87 were not roller. The only difference is none ever came with Mass air.