5.0 Aode Into 57 Wagon Swap Questions

big vic · Jun 4, 2017

Hi I have 57 wagon that I put a 95 5.0 and AODE ino I have the complete doner car and want to hook up all the harnesses so it will be easy to fix or diagnose the Mustang GT was totaled but ran great all the mechanicals of the swap have been done I need help with the easiest way to get it running

General karthief · Jun 4, 2017

This may not be the place for this inquiry, I think I'll move it to the tech thread. Sounds like you got a good jump on the swap, if it helps there are some wiring diagrams for 95 mustangs on veryuseful.com.

big vic · Jun 6, 2017

took some pics today

big vic · Jun 6, 2017

the tank pic is the new tanks inc tank with internal fuel pump and braided teflon lines all the way to the fuel rails feed line with a filter and return line both #6 custom tank to fit with fill line mated up to the stock location fuel door
shifter pic is shifter from the mustang mounted to the trans tunnel i will build a counsol around it
pedal pic is pedal from the mustang mounted and using the stock cable

i used the correct belt for AC deleat and a new stock tensioner

huge be cool radiator fitted into the core support took all night of cutting to make it look good but it look great

huge cooling fan with relay set up on a switch so i can control the coodown or warmup

to fit the 95 motor into the 57 frame i needed a 67 mustang pan and oil pickup with front sump to give me the clearance for the steering linkage

stock headers fit perfectly with only 1 small dent to clear the steering box the passenger side was a perfect fit

to fit the AODE trans i moved the stock crossmember back 3 inches and welded a plate at the height needed for correct pinion angle

to mount the stock airbox I cut out a section of inner fenderwell and ran the snorkle into the fender

i had a custom driveshaft made

i had to raise the floor in the back to fit the tank but its under the pare tire well and you can till fit a spare i also installed a trap door in the floor to service the fuel pump
spent all winter on the project working around my 60 hr a week job now all i need is to get the harness hooked up
the engine harness in on the engine and i have all the wireing and modules from the doner car 95 GT I jut dont know where to go from here i was hoping someone would be able to tell me what to hook up to get it running

#6 big vic, Today at 9:08 PM
Edit
+ Quote Reply
DavedacarpainterThat's MISS Susie Homemaker to you mister!
SN Certified Technician
OMG, that is so freaking cool!

jrichker · Jun 7, 2017

big vic · Jun 7, 2017

thanks

General karthief · Jun 7, 2017

Ships ahoy! Don't you need a captains license to drive that inside the city limits?
Man whatta ride, love those things!
Do you still have the donor car?

big vic · Jun 7, 2017

I have every single harness and miule from bumper to bumper but the rest is gone

5.0 Aode Into 57 Wagon Swap Questions

big vic

General karthief

wonder how much it would cost to ship you a pair

big vic

Attachments

big vic

jrichker

StangNet's favorite TOOL

big vic

General karthief

wonder how much it would cost to ship you a pair

big vic

Similar threads

5.0 Aode Into 57 Wagon Swap Questions

wonder how much it would cost to ship you a pair

Attachments

StangNet's favorite TOOL

wonder how much it would cost to ship you a pair

Similar threads

Privacy & Transparency

Privacy & Transparency