5.0 clutch recommendations

I'm looking for a good clutch that will work with slicks, something that won't come apart. I will be running a scattershield regardless though.

this will be behind a 5.0, street/strip. ~420 HP. I've read that different clutches are easier on the drivetrain as they will absorb some of the shockload on launch.

any ideas what would be best for my application? I was thinking either something from centerforce or Spec stage II.
 
It has a T5z, rated at 450ish horsepower. I have a new king cobra but am unsure whether it would be able to take much abuse. I Know it is made by Valeo if that makes a difference, there are a few companies that make the KingCobra style clutch, which is better, I don't know.

I dont plan on launching the car WOT so a drag only type of clutch isn't needed, just something that will take the abuse and hopefully not come apart.
 
Only running a mild street combo -- GT40 heads/E303/Mac shorties/Flowmasters -- but have had a CF DF on there for 6 or 7 years, 80k miles, a bunch of hole shots, more than a few missed shifts, and the only thing that ever went wrong was the Ford throwout bearing in there. Feels no different from stock but can take anything I've thrown at it. It might seem expensive up front but it wasn't. Never a hiccup.
 
If you already have a King Cobra kit, you could use the pressure plate and upgrade the disc to a McLeod dual friction. That's what I'm running in my car. You can get the disc from www.ddperformance.com. I had a Spec stg2 in my car before that. It was a good clutch, but it was pretty grabby, and it had a heavier pedal then my current set-up
 
Grn92LX said:
www.nitrostangracing.com Get the promotion modified/blueprinted FMS HD unit with the mcleod df disk. $289. It'll handle way moree than you're asking w/o being a hard hitting chatter box!


Just out of curiousity, what is there to blue print on a pressure plate/ clutch?

the finger pressure, flatness, and run out is the only things I can come up with. But is it nesssary, are the aftermarket units quality bad enought to need blueprinting.
 
the standard king cobra clutch can only old aprox 35% more than stock, or 300 horse give or take. I'm curious about this blueprinted one too, more details? what can it hold? what is the disc made of? I'm skeptical. I wouldn't use a kc/frpp hd anywhere near my car if I was making over 300 horse.

Specs grab way, way too hard, especially at your power level.

Centerforce, and mc cleod come to mind, although I only have experience with the dual friction, which is a great clutch.