5.0 Gear Choice

KJ Hoppus

New Member

Mar 18, 2003

1,008

0

0

Elk Grove CA

Dec 16, 2003

#1

• Dec 16, 2003

• #1

Well my freind has an 89 GT with the following mods: Cobra Intake, CAI, Shortie Headers, O/R Hpipe, Flows, pullies, and a shifter. He is thinking about getting gears next and is not sure what to get. I am a 4.6 guy so im not to sure about what gear is optimum for a 5.0. The car will see alot of strip action, but it is a daily driver. Basically my question is are 4.10s to much are should he go with 3.73 or 3.90s? BTW its a 5speed with 3.08 now. Thanks

 

Black 93 Fox

Active Member

Jun 1, 2003

1,995

0

49

Vancouver,Washington

Dec 16, 2003

#2

• Dec 16, 2003

• #2

3:73's I love mine and my car is street/strip and also daily driver

 

KJ Hoppus

New Member

Mar 18, 2003

1,008

0

0

Elk Grove CA

Dec 16, 2003

#3

• Dec 16, 2003

• #3

Black 93 Fox said:

3:73's I love mine and my car is street/strip and also daily driver

Click to expand...

what rpm are you at in 4th gear at the traps?

 

B

blk306

New Member

Jun 1, 2003

213

0

0

MD

Dec 16, 2003

#4

• Dec 16, 2003

• #4

3.73s

 

Black 93 Fox

Active Member

Jun 1, 2003

1,995

0

49

Vancouver,Washington

Dec 16, 2003

#5

• Dec 16, 2003

• #5

im not sure on that one i cant remeber. the fastest i have gone is almost 93

 

KJ Hoppus

New Member

Mar 18, 2003

1,008

0

0

Elk Grove CA

Dec 16, 2003

#6

• Dec 16, 2003

• #6

if you guys could do it again would you go higher maybe 3.90s?

 

B

blk306

New Member

Jun 1, 2003

213

0

0

MD

Dec 16, 2003

#7

• Dec 16, 2003

• #7

If it was N/A, wasn't a daily driver and saw more strip than street, probably so.

 

KJ Hoppus

New Member

Mar 18, 2003

1,008

0

0

Elk Grove CA

Dec 16, 2003

#8

• Dec 16, 2003

• #8

blk306 said:

If it was N/A, wasn't a daily driver and saw more strip than street, probably so.

Click to expand...

im debating telling him to get 3.73s or 3.90s now

 

Black331Stang

Active Member

Apr 29, 2003

1,485

0

36

Long Island, NY

Dec 16, 2003

#9

• Dec 16, 2003

• #9

3.73s...go for it

 

mike keirstead

New Member

Aug 6, 2003

1,121

0

0

ROLLING A JOINT

Dec 16, 2003

#10

• Dec 16, 2003

• #10

I trap 108 with 3.73s. With a 26 inch tire.Its around 5900 through the traps. Love the gear. 3.90s maybe better. Depends on your motor really. If its just a street car then i would go with 3.73s and if its a track car 3.90s or 4.10s.

 

Carney Woods

New Member

Dec 29, 2002

191

1

0

Montreal, Quebec

Dec 16, 2003

#11

• Dec 16, 2003

• #11

3.73's

 

TrophyHead

15 Year Member

Mar 18, 2003

1,195

11

49

PA

Dec 16, 2003

#12

• Dec 16, 2003

• #12

I have 4.10's But to tell you the truth I might have went a little to high. It's really fun downshifiting from 4th to 3rd and having the car go sideway's. If I could do it over I would get 3.90's. I like the 4.10's theres alot of get up and go. I plan on going NA with maybe a little shot of NOS in the future. The promblem with 4.10's with a stock motor is it doesnt rev high enough.

I think you'll be happy with either 3.73's or 3.90's.

 

willys1

Active Member

Dec 2, 2003

1,004

1

36

New Jersey

Dec 16, 2003

#13

• Dec 16, 2003

• #13

Dude,Im getting 3.73's next week.( I have 2.73 right now) 3.90's sound a bit high , I do 120 miles a day,If your like me and do a lot of highway driving go 3.73's.I will post my results next week.Im like a kid in a candy store,I CANT WAIT!!!!!!!!!!!!!!!

 

HaggardGT

New Member

Dec 16, 2003

59

0

0

Tolland, CT

Dec 16, 2003

#14

• Dec 16, 2003

• #14

I'd go with 3.90s if I were him. Pro 5.0 is the only company that makes such a ratio, at least as far as I know. Think of it this way...

4.10s are GREAT gears for a 5.0L with only minor mods. It was the first thing that was done to my car when my friend still owned it. 3.73s are GREAT gears for, say, a '93 Cobra with full exhaust, CAI, etc. etc. It'll pull a lot harder than the stock 3.08s, and highway top end won't be affected too too much because of the mods performed on the car.

The reason(s) I suggest 3.90s? A good compromise. If you put 4.10s and 3.73s in the same car, the difference really isn't THAT phenomenal. Yeah, you feel it, but without performing other mods it's not gonna be a night and day difference. Have you ever heard of people complaining about spedometer discrepancies after a gear change? Sure. Even if you change the speedo drive gears, it'll still read a little bit off. Surprisingly, 3.73s and 4.10s use the same drive gears. Since 3.90s are a ratio in the middle, I would guess that your speedo will be most accurate with them. Plus, you get the advantages of the high 4.10 and the not-so-high 3.73.

 

Jerry Leaming

Member

Nov 2, 2003

477

2

18

Olympia Wa

Dec 16, 2003

#15

• Dec 16, 2003

• #15

Motive also make 3.90 gears.

 

N

needforspeed440

New Member

Dec 5, 2003

49

0

0

Dec 16, 2003

#16

• Dec 16, 2003

• #16

hey haggardgt...if you dont mind me asking have you run your car? if so what did you run? Curious cuase i have similar mods.

 

TrophyHead

15 Year Member

Mar 18, 2003

1,195

11

49

PA

Dec 16, 2003

#17

• Dec 16, 2003

• #17

Here is a gear calculator....For you guys still contemplating on what gears to get.

http://www.corral.net/tech/gearcalc.html

 

S

Sir Hacksalot

Founding Member

Oct 22, 2001

363

0

0

Ankeny, IA

Dec 16, 2003

#18

• Dec 16, 2003

• #18

KJ Hoppus said:

Well my freind has an 89 GT with the following mods: Cobra Intake, CAI, Shortie Headers, O/R Hpipe, Flows, pullies, and a shifter. He is thinking about getting gears next and is not sure what to get. I am a 4.6 guy so im not to sure about what gear is optimum for a 5.0. The car will see alot of strip action, but it is a daily driver. Basically my question is are 4.10s to much are should he go with 3.73 or 3.90s? BTW its a 5speed with 3.08 now. Thanks

Click to expand...

I had similar mods on my previous car, and had 3.55 gears. I wish it would have had 4.10's in it.

If I were him, I would get the 4.10's. You said that this car will see a lot of strip action, and that he drives it daily. Get the 4.10's, and don't look back. You can run a taller tire if the RPM's bother him, and he will appreciate the extra grunt in the 60 foot with the deeper gears. Invariably, this guy will add some heads and a cam, and the 4.10's will compliment them even more.

Let me put it this way, if I did not have plans to buy a KB Blowzilla 2.2 in the next 6 months, I'd be putting some 4.10's or maybe even 4.30's in my baby.

Hax

 

KJ Hoppus

New Member

Mar 18, 2003

1,008

0

0

Elk Grove CA

Dec 16, 2003

#19

• Dec 16, 2003

• #19

Jerry Leaming said:

Motive also make 3.90 gears.

Click to expand...

i think richmond makes them 2

 

KJ Hoppus

New Member

Mar 18, 2003

1,008

0

0

Elk Grove CA

Dec 16, 2003

#20

• Dec 16, 2003

• #20

Sir Hacksalot said:

I had similar mods on my previous car, and had 3.55 gears. I wish it would have had 4.10's in it.

If I were him, I would get the 4.10's. You said that this car will see a lot of strip action, and that he drives it daily. Get the 4.10's, and don't look back. You can run a taller tire if the RPM's bother him, and he will appreciate the extra grunt in the 60 foot with the deeper gears. Invariably, this guy will add some heads and a cam, and the 4.10's will compliment them even more.

Let me put it this way, if I did not have plans to buy a KB Blowzilla 2.2 in the next 6 months, I'd be putting some 4.10's or maybe even 4.30's in my baby.

Hax

Click to expand...

he does plan on heads and a cam after a while, so i think that 3.90s sound perfect. thanks for the input guys.