5.0 mustangs intakes

That is a blanket statement that is SO wrong. I've seen plenty of them make more power than the aftermarket intakes - it totally depends on the engine componants used.

I agree I put an cobra intake on my car and it made a world of differents. Just depends on what your going to do later on.

What all do you plan on doing to the car later? That would be how I make my decision?
 
right now im going all motor gt40p heads fully ported ported intake b-303 cam 1.73 rocker stock bottem end just new ring bearing and gasket long tube headers aod lot of work done to it 3.73 gears. im hoping to get in the 11s. car weight is under 3000 pounds. i was told by a few people that the Explorer intake out flows the cobra and the gt40.
 
The Explorer does not outflow the others in general, but each intake will vary some just due to casting differences. Any of the three (GT40/Cobra/Explorer) is a great match for your parts. If the heads flow more than 220cfm, then porting the lower intake will help make more power too.
 
Save your $$$, cobra/explorer manifolds are a dissapointment.

I love when ignorant statements like this are made.

my buddy found an explorer intake in the junkyard for $75, brought it home, home ported it, and slapped it on his mustang.

his mustang has the afr 165 heads, custom cam, and had an rpm 2 intake.

He pulled the rpm 2 intake off and put the explorer intake on, and it made every bit of the same power, and he believes he got some low end back too.

Great intake, can't go wrong for the price.