5 lug conversion MC ?

sweet88gt

Member
Jun 25, 2005
334
0
16
Venice FL
Ok, I just got the car alignment done today and was testing the brakes out. I have 95 spindles and calipers up front and ranger axles and drums out back. The car doesnt seem to stop any better than before. I havent changed the MC or booster yet. I have ordered a 95 MC and booster and its on its way. Shouldnt the car stop marginally better than before?? My buddy has an 85 GT and did the same swap and his car stops alot better than mine. I'm thinking that has something to do with his MC stock being a 2 port design and mine stock being a 3 port design. If I change to the 2 port design MC and leave the drums until funds are available this should solve the problem correct?? I'm looking for some suggestions. Thanks
 
I think I misunderstood...
Changing from 4 lug to 5 lug would not affect braking performance.

If you changed the rotor size, then you would see a change.

Maybe you still have some air in the lines. Some times it is a real pain to get the air out.
 
vristang said:
I think I misunderstood...
Changing from 4 lug to 5 lug would not affect braking performance.

It does if you change the calipers.


He is right about needing a new MC.

With the 95 calipers up front, you would want to upgrade to a '93 Cobra 1" bore MC.


However, if you plan on swapping to rear SN95 disks you might be better off locating a 94-95 GT/V6 MC and using that instead.

That MC might work as well if you get a set of 99-04 dual piston GT PBR's and run them.

Optimally though the 1" bore is what you want
 
I have sn95 stuff up front and an 85 SVO rear disc conversion in back. My brakes work fine but I feel that they could be better. I kept the stock MC and the svo had a totally different one with an actual cover and not a cap. The svo came with the same one they put in the 93 cobra I believe. There is a site out there that has a lot of good brake upgrades and needed supplies. Just search google for mustang brake upgrades.
 
What I should have said was that I feel the brakes are slightly worse than the stock 4 lug. I have the 95 calipers up front and I thought they have a slightly bigger piston than the stock brakes. My thought was with a bigger piston in the calpier it should stop better than before. I am planning on running 95 brakes in the rear, so I order 95 MC and booster. My understanding is I wouldnt need the larger booster unless my camshaft wasnt pulling enough vac. Otherwise I could change the MC and retain the stock booster. Does that sound right?? I wish I could find a 93 cobra MC because it is the all around best for the bore size. If I planned on running 13 cobra brakes up front and 11.65 out back what are your thoughts about the MC and booster and what else could I be missing?? Thanks
 
sweet88gt said:
If I planned on running 13 cobra brakes up front and 11.65 out back what are your thoughts about the MC and booster and what else could I be missing?? Thanks


If that is your ultimate goal, you want either a 94-95 GT/V6 MC or a 94-95 Cobra MC.

Booster is optional, but more than likely you will need it so i recommend installing it from the start.

Make sure you factor in the mods to the prop valve...ie gutting the stocker and adding an adjustable

www.sn95brakes.com
 
Mustang5L5 said:
If that is your ultimate goal, you want either a 94-95 GT/V6 MC or a 94-95 Cobra MC.

Booster is optional, but more than likely you will need it so i recommend installing it from the start.

Make sure you factor in the mods to the prop valve...ie gutting the stocker and adding an adjustable

www.sn95brakes.com
Yes that in the end will be the goal, but for now stock 95 brakes will be a good upgrade. I plan on the supercharger soon and the stock brakes were scary. At the track I have to ease into the brakes and wait for the last turnoff. I was never happy when my e350 work van loaded down will stop just as good as the mustang. Thats just not going to cut it anymore.