5 lug conversion with 96+ spindles

[Deece]

I want to do a 5 lug swap AND pickup another 3/4 of an inch in width up front. I read somewhere that the 96+ spindles will push the width out about that far. Has anyone done this to their fox body if so what all is involved? Any help greatly appreciated

 

[tjm73]

See your other post.

 

[mustangjoe87]

i have 96 spindles on mine, its 8mm wider not 3/4in. if you use the sn95 axle shafts its 3/4in wider in the rear.