• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

5sp Burnout at the Track Tips!

  • Thread starter Thread starter Redeemedsoul
  • Start date Start date Nov 7, 2007
  • 1
  • 2
Next
1 of 2 Next Last

Redeemedsoul

New Member
Sep 4, 2005
70
0
0
Nov 7, 2007
#1
  • Nov 7, 2007
  • #1
Can anyone steeeer me in the right direction if this is the right process to burnout if you dont have a trans break.

:Track: :Track: :Track: :Track:

1- engage clutch
2- clutch engaged, shift to first
3- REV RPMS, disengage clutch
4- slam break, while accelerating
5- Let go of break, clutch, shift 2nd (with or without accelerating?)
6- back on break to continue warming up tires in 2nd.
7- release break, move forward, clutch in
8- stage


Now my question is #5 with or without acceleration
and
a) Wouldnt this take a huge toll on your breaks?
b) Wouldnt the car budge forward too far if you dont do 4-5-6 quick enough?

Are there any better ways to light up your tires with a 5spd?

-rS
 

ryan218

In just 10 years, I'll be old enough to drive!!!!
Dec 28, 2005
0
1
38
columbus ohio
Nov 7, 2007
#2
  • Nov 7, 2007
  • #2
if you can do the heel toe do that....i cant...so i just dump the clutch and ride the brake.
 

millhouse

Founding Member
May 14, 2002
1,985
0
46
Simpsonville, SC
Nov 7, 2007
#3
  • Nov 7, 2007
  • #3
Forget first gear, just dump it while in second and get on the brakes. Let up a little bit so as not to fry your rear brakes and when your finished roll out of the burnout. I've never tried the heel/toe method, for a burnout....but really I never felt I needed to.
 

25thmustang

Mustang Master
Sep 5, 2003
2,021
85
99
Montgomery, NY
Nov 7, 2007
#4
  • Nov 7, 2007
  • #4
heel toe is the easiest for me anyways...

right foot heal on the brake, toe on the gas. Rev to 5000 or so and dump the clutch and the tires should spin and the car shouldnt move.

Either that or dump it high in the RPM. and then left foot on the brake fast.

Dont try and shift 2nd in a burnout. Fast way to mess something up.
 

ryan218

In just 10 years, I'll be old enough to drive!!!!
Dec 28, 2005
0
1
38
columbus ohio
Nov 7, 2007
#5
  • Nov 7, 2007
  • #5
millhouse said:
Forget first gear, just dump it while in second and get on the brakes. Let up a little bit so as not to fry your rear brakes and when your finished roll out of the burnout. I've never tried the heel/toe method, for a burnout....but really I never felt I needed to.
Click to expand...


i cant do it..i got clown feet
 

RYC CUKR

Founding Member
May 19, 2002
1,437
1
38
Orlando
Nov 7, 2007
#6
  • Nov 7, 2007
  • #6
25thmustang said:
Dont try and shift 2nd in a burnout. Fast way to mess something up.
Click to expand...

Agreed, trying to go from 1 to 2 during a burnout is a good way to fry your clutch.

Before I had my line lock I would just push the clutch in, bring the rpms up to around 5k, dump the clutch and get on the break with the left foot.

But I am lazy and got a line lock and now it is super easy, and saves your rear brakes some.
 

bloopbloob

Member
Sep 27, 2006
578
4
16
Alberta
Nov 7, 2007
#7
  • Nov 7, 2007
  • #7
i have a hard time with the heel-toe method also, but i also have only tried a couple brakestands for the sake of my (expensive ass) new tires. as for the toll on the brakes, if you think about how many times your drums go around your pads every time you come to a stop (especially from highway speed), a few second burnout is nothing.
 

millhouse

Founding Member
May 14, 2002
1,985
0
46
Simpsonville, SC
Nov 7, 2007
#8
  • Nov 7, 2007
  • #8
Here is one of my doing a little burnout. Notice how I'm on the brakes and slowly roll into the burnout? Sometimes I roll a bit more than others...but the point is you'll need to find that modulation point.

http://www.youtube.com/watch?v=j1dBvPBTQ1o

http://videos.streetfire.net/video/9af34bfe-870b-476a-8262-99e0007f601a.htm
 

fastford91

New Member
Aug 15, 2006
254
1
0
Niagara ,Ontario, Canada
Nov 7, 2007
#9
  • Nov 7, 2007
  • #9
heel toe dont work for me i tried it! but my size 12 boats get in the way and all it does is fry the clutch!
 

25thmustang

Mustang Master
Sep 5, 2003
2,021
85
99
Montgomery, NY
Nov 8, 2007
#10
  • Nov 8, 2007
  • #10
I know guys with size 14s who can heal toe it... I had issues the first few times, but figured out the best way to do it, and have no issues now. If your feet are "that big" then don't use the heal/toe, use more of the sides of your feet, can be done just the same. Also on the street or with water the tires should go up real fast...
 

blackened88lx

Active Member
Aug 9, 2006
0
4
28
Connecticut
Nov 8, 2007
#11
  • Nov 8, 2007
  • #11
Like the other people said, never shift during a burnout. If you're on street tires, 1st gear will work, and you just want to clean the tires off, not do a real burnout. You can practice and learn the heel-toe, or side-step method which is when you use the sides of your right foot like 25th mentioned. With 1st gear burnouts I use the side-step method because the car usually makes a big leap in 1st when you jump over to the brake with your left foot. In water it would be a different story, but I'm used to the street. With slicks, or if you're just doing a burnout for show, use 2nd gear like millhouse described. For 2nd gear I usually jump over with my left foot because it requires more throttle and it's easier to modulate the brake and gas with 2 feet. Also, if you do it right, the tires will break loose much faster so the car won't make a jump like in 1st, it almost just sits there for a second.
 

ninety15.0

New Member
Mar 10, 2004
1,336
0
0
Nov 8, 2007
#12
  • Nov 8, 2007
  • #12
I think the heel/toe or sidestep way is the only way to do a burnout. The very first time i ever did a burnout was just jumping on the break after dropping the clutch. Not only is it violent but the car moves all over the place. Not only forward...but normally it gets cocked off sideways too.

I use the sidestep method with the sides of my feet most times...and if i need to modulate the throttle a little more i use the heel/toe method. Put it in 2nd gear...rev to 4-5k and dump the clutch....pretty straight forward.
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
Nov 8, 2007
#13
  • Nov 8, 2007
  • #13
ryan218 said:
i cant do it..i got clown feet
Click to expand...


Yeah... and your mom gets pissy when you leave rubber in her driveway and plow over the trash cans.
 

93gtmustang

10 Year Member
Oct 21, 2006
515
43
49
Nov 8, 2007
#14
  • Nov 8, 2007
  • #14
If your running street tires, drive around the water box and pe-stage and then stage. The compound on street tires becomes slippery when doing a burn out. Plus the tread depth on street tires are going to bring the water up to the starting line and make you spin anyways.
A friend of mine drives around the water box with street tires and runs low 13's with his Parnelli Jones 2007 Mustang.
If your running drag radials, dot slicks, or slicks,
Rip it once through the water box and roll out about 3- 6 feet.
Shift into 2nd
Bring your rpms up to 4000 and dump the clutch
Have your drivers side mirror tilted down so you can see your rear tire
When they start to show some good smoke, roll out of the burn out and into pre-stage.
Also, if your not running skinnies on the fronts, drive around the water box and back in. Front street tires will also bring water to the line.
A line lock is the way to go when doing a burn out for drag racing purposes.
 

fastford91

New Member
Aug 15, 2006
254
1
0
Niagara ,Ontario, Canada
Nov 8, 2007
#15
  • Nov 8, 2007
  • #15
Daggar said:
Yeah... and your mom gets pissy when you leave rubber in her driveway and plow over the trash cans.
Click to expand...

 
M

mike93lx

Member
May 22, 2003
391
0
16
Hudson, MA
Nov 8, 2007
#16
  • Nov 8, 2007
  • #16
i highly recommend spending the few dollars on line lock. you'll have much better control over the car (safety wise) and you won't be beating the crap out of your brakes.

i love my line lock and it wasn't very expensive.
 

Foxfan88

My Grandpa has great wood.
Sep 13, 2004
2,487
4
0
Miami, Ok
Nov 8, 2007
#17
  • Nov 8, 2007
  • #17
i just mash the brake pedal hard with my right heel and rev with my toes. pop it in 2nd and rev it to around 4k and pop the clutch quick. the tires will turn over and i keep holding the brake with my heel and adjust the gas during the burnout, when i am done i let off the brake and roll forward.
 

talladam

Member
Apr 3, 2007
50
0
6
Monroeville OH
Nov 8, 2007
#18
  • Nov 8, 2007
  • #18
i can't heel toe with my 15's but i did do the cover half the brake and gas with one foot. roll the right side of my foot more towards the gas and dump on that bitch. worked okay but i still need to install my linelock.
 

black87ttop

Member
Oct 29, 2007
43
2
8
burlington,new jersey
Nov 9, 2007
#19
  • Nov 9, 2007
  • #19
yeah i wear size 14 and 15 shoes depending on brand, and i can do the heel toe method, so there is no reason why anybody else cant , unless they have bigger feet than me. I usually start out in first then i use my right foot to control brake and gas, then i can shift and use the clutch with my left leg. I never had any problems this way. and i have about 10 friends that can vouch for the 4 gear burnout i did one nite. LOL wish i had a camera for that.
 

25thmustang

Mustang Master
Sep 5, 2003
2,021
85
99
Montgomery, NY
Nov 9, 2007
#20
  • Nov 9, 2007
  • #20
You guys realize during the burnout/shift thing, the tires stop in each gear. So why not just try and start it in 4th?
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

K
TKX Transmission Shifting Problem
  • KWC156
  • Jun 23, 2025
  • Other Auto Tech
  • 2
Replies
21
Views
2K
Other Auto Tech Jun 13, 2026
427nostang
4
SOLD SOLD!!!! 1993 Notchback Roadracer For Sale. She's a beast!
  • Boydster
  • Apr 25, 2025
  • Fox Body Mustangs For Sale (1979-93)
Replies
0
Views
1K
Fox Body Mustangs For Sale (1979-93) Apr 25, 2025
Boydster
R
2005 V6 manual shift issue
  • Rrf
  • Aug 28, 2023
  • 2005 - 2009 Specific Tech
Replies
1
Views
2K
2005 - 2009 Specific Tech Aug 29, 2023
Dino Dino Bambino
New daily driver help needed.....not a mustang but mustang drivetrain.
  • Wayne Waldrep
  • Jun 17, 2024
  • Other Auto Tech
  • 3 4 5
Replies
80
Views
6K
Other Auto Tech Jul 28, 2024
manicmechanic007
SN Mustang Magnum T56 swap
  • revhead347
  • May 24, 2024
  • 1994 - 1995 Specific Tech
Replies
15
Views
6K
1994 - 1995 Specific Tech Jun 28, 2026
GearHeadGuy
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?