• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

6 cyl. --> V8 swap, opinions.

  • Thread starter Thread starter earleys94gt
  • Start date Start date May 11, 2009

earleys94gt

Active Member
Aug 31, 2003
1,223
16
49
Ashley, Ohio
May 11, 2009
#1
  • May 11, 2009
  • #1
I have the oppourtunity to pick up an 86 6 cyl., in primer, for a decent price.

I am looking for opinions, comments etc. about doing a 6-->8 swap.

What things NEED to be changed/replaced? (suspension, brakes etc.)

In the grand scheme, is it just better to buy a V8 stang from the get-go?

Thanks in advance guys.
 

revhead347

Apparently my ex-husband made that mistake.
20+ Year Stangneter
Jun 14, 2004
9,303
1,648
214
Acworth, GA
May 11, 2009
#2
  • May 11, 2009
  • #2
With a car that old, if you want to do a carb setup it's not a bad deal. The car is 23 years old, there is a lot of stuff that's going to need to be changed anyway. As far as what needs to be changed, it all depends on what you want out of the car. If you just want a basic mustang with a 302, you can use the stock suspension. The 7.5 rearend will hold up too.

Kurt
 

Chythar

Recently finished repairing my rear
20+ Year Stangneter
Aug 26, 2004
2,374
140
113
Foothill Ranch, CA
May 12, 2009
#3
  • May 12, 2009
  • #3
Don't know anything about the 86 model year for a 6 to 8 swap, but it was my understanding tha the 94-95 years were easy 'cause they share the same k-member and tranny mount. This makes me think you may have to swap the k-member to get a V8 to fit in that '86.

You may want to post this in the 5.0 forums as well, if you haven't already.
 

earleys94gt

Active Member
Aug 31, 2003
1,223
16
49
Ashley, Ohio
May 12, 2009
#4
  • May 12, 2009
  • #4
Thanks for the replys guys.

It was just an idea I was throwing around.

I had figured on things like K-members, mounts, harness' etc., would need to be changed.

I'll look in the Fox Forum and see what they say.
 

ProKiller

Founding Member
Apr 26, 2002
3,064
15
78
PA
May 12, 2009
#5
  • May 12, 2009
  • #5
foxes' never had a 6cyl in it. they were all either 4 or 8s. but either way the principals are the same. k-member, tranny, rear, harness, etc. check over on the fox forum, i think they have a whole swap board for stuff like this.
 
You must log in or register to reply here.

Similar threads

D
Yet another v8 swap
  • dulcimerbob
  • Sep 19, 2026
  • 1974 - 1978 Mustang II Talk & Tech
  • 3 4 5
Replies
84
Views
2K
1974 - 1978 Mustang II Talk & Tech Yesterday at 10:37 AM
dulcimerbob
D
J
For Sale MASTER LISTING: Abandoned '66 Mustang Restomod Part-Out (Wilwood, Ididit, Quick Performance, Mishimoto)
  • JasonB66
  • Jul 23, 2026
  • Suspension
Replies
0
Views
259
Suspension Jul 23, 2026
JasonB66
J
0
V6 to V8 Swap info
  • 02_2v_Curtis
  • Jan 11, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
995
1996 - 2004 SN95 Mustang -General/Talk- Oct 7, 2026
2v_johnny
2
J
Fox body - godzilla, coyote, or 408w stroker - Best route for budget build?
  • jaygee15
  • Jan 27, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 30, 2025
2000xp8
R
What's it Worth? 1997 Cobra, a ton of mods and restoration
  • riored97snake
  • Jun 18, 2026
  • What is it Worth?!?!?
Replies
2
Views
382
What is it Worth?!?!? Jun 21, 2026
riored97snake
R
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?