67 Fastback was Automatic now Manual

S

slater_san

New Member

Aug 21, 2019

5

0

1

Nanaimo

Aug 21, 2019

#1

• Aug 21, 2019

• #1

I have a 67 Fastback that was converted from an automatic transmission to manual. Problem is, there is no activation for the reverse gear lights (white) and I can't pass the safety check until this is rectified. How do I add an automatically activated switch for reverse gear that will turn on the reverse gear lights? Is there a kit for something like this?

 

swooshdave

Member

Jan 1, 2008

34

13

18

Portland, Oregon

Aug 21, 2019

#2

• Aug 21, 2019

• #2

Do you know which manual transmission is in the car?

 

S

slater_san

New Member

Aug 21, 2019

5

0

1

Nanaimo

Aug 21, 2019

#3

• Aug 21, 2019

• #3

swooshdave said:

Do you know which manual transmission is in the car?

Click to expand...

Sorry, I'm not very mechanically inclined (yet)
All I can tell you at this point is that its 4 speed
If there is something I can look at that would help,
the car is in the driveway

 

swooshdave

Member

Jan 1, 2008

34

13

18

Portland, Oregon

Aug 22, 2019

#4

• Aug 22, 2019

• #4

slater_san said:

Sorry, I'm not very mechanically inclined (yet)
All I can tell you at this point is that its 4 speed
If there is something I can look at that would help,
the car is in the driveway

Click to expand...

That is probably going to narrow it down.

Unfortunately there isn't a lot of traffic on any of the vintage forums I've joined so getting answers is slow or non-existent. I've had much better luck with the several Mustang groups on Facebook, although the information is a bit more chaotic, at least it's more rapid.

I'd highly recommend shoving a camera (ie. phone) under the car and get as good a picture of the transmission as you can. Some people will be able to recognize it from just a picture.

 

horse sence

15 Year Member

Nov 29, 1999

12,465

8,439

233

Wile Coyote's stunt double

Aug 22, 2019

#5

• Aug 22, 2019

• #5

The switch attaches to the shifter ,if it is the original shifter ,a hurst shifter could have one adapted

 

horse sence

15 Year Member

Nov 29, 1999

12,465

8,439

233

Wile Coyote's stunt double

Aug 22, 2019

#6

• Aug 22, 2019

• #6

It bolts to the shifter body ,when you shift into reverse ,the arm on the shifter pushes the plunger and turns on the back up lights.
You will get more smart ass replies on face book usually than helpfull because they are not kept up as well as the forums .

 

Reactions: 2Blue2

S

slater_san

New Member

Aug 21, 2019

5

0

1

Nanaimo

Aug 24, 2019

#7

• Aug 24, 2019

• #7

Thanks guys, The garage I took it to found a similar activator switch and its all good now. Appreciate the feedback