• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-

67 Steering Column Tube

  • Thread starter Thread starter Springtime Yellow
  • Start date Start date Aug 2, 2015
S

Springtime Yellow

Member
Aug 2, 2015
6
1
13
Aug 2, 2015
#1
  • Aug 2, 2015
  • #1
I have a 67 coupe and have just taken out the pedal support to replace it with a new one. To get the new one back in I want to pull the steering column tube to make it easier but it wont come out. Is it possible to pull the tube on a 67? I see pictures of a lot of 65s without the column tube but since mine isnt budging I'm not sure if its possible. Help?
 

horse sence

15 Year Member
Nov 29, 1999
12,350
8,238
233
Wile Coyote's stunt double
Aug 2, 2015
#2
  • Aug 2, 2015
  • #2
I moved you to Classic Talk ,Welcome to Stangnet .

If it is the box with the one piece shaft ,Remove the clamp under the dash ,remove or loosen the clamp at the floor and the tube will slide up the shaft and come out .
If it is the box with the short shaft there is a C clip under the steering wheel that has to be removed ,it retains the top bearing in the column .Remove or loosen the clamp at the floor and it will pull out . Don't forget to unplug the wiring first on both types .
 
A

Aquarius

New Member
Jul 18, 2007
28
0
1
Aug 3, 2015
#3
  • Aug 3, 2015
  • #3
Is your steering wheel still attached? I can speak for the solid shaft model: If yes, that has to come off (held on by one big nut), then unplug the wire harness from the underdash harness, then unbolt the 4 bolts at the retaining plate on the interior firewall. It should come up after that.
 
S

Springtime Yellow

Member
Aug 2, 2015
6
1
13
Aug 4, 2015
#4
  • Aug 4, 2015
  • #4
Aquarius said:
Is your steering wheel still attached? I can speak for the solid shaft model: If yes, that has to come off (held on by one big nut), then unplug the wire harness from the underdash harness, then unbolt the 4 bolts at the retaining plate on the interior firewall. It should come up after that.
Click to expand...
I have the solid shaft and I've taken off the steering wheel, removed the little wiring assembly, and I never had the clamp at the firewall. Everything is disconnected and it's not moving. I'm assuming it's just stuck? I've tried to get it to slide off by prying it where it's seperated a little bit from the steering box.
 

horse sence

15 Year Member
Nov 29, 1999
12,350
8,238
233
Wile Coyote's stunt double
Aug 4, 2015
#5
  • Aug 4, 2015
  • #5
In the top at the shaft ,did you remove the tapered seat ? Push down on the steering shaft cover and it will pop up .pull the taper out . it is the thing under the spring under the steering wheel .Some times it is stuck .
 
S

Springtime Yellow

Member
Aug 2, 2015
6
1
13
Aug 6, 2015
#6
  • Aug 6, 2015
  • #6
horse sence said:
In the top at the shaft ,did you remove the tapered seat ? Push down on the steering shaft cover and it will pop up .pull the taper out . it is the thing under the spring under the steering wheel .Some times it is stuck .
Click to expand...
I'm fairly certain I have. Ive taken everything I can off and I can see straight down the tube.
 

horse sence

15 Year Member
Nov 29, 1999
12,350
8,238
233
Wile Coyote's stunt double
Aug 6, 2015
#7
  • Aug 6, 2015
  • #7
It must be stuck to the steering box ,you may have to pry up to get it loose .Have you tried to twist the tube ?I think it is the rubber seal at the end of the shaft in the tube ,it has probably bonded its self ,kind of like a radiator hose does .
 
S

Springtime Yellow

Member
Aug 2, 2015
6
1
13
Aug 8, 2015
#8
  • Aug 8, 2015
  • #8
horse sence said:
It must be stuck to the steering box ,you may have to pry up to get it loose .Have you tried to twist the tube ?I think it is the rubber seal at the end of the shaft in the tube ,it has probably bonded its self ,kind of like a radiator hose does .
Click to expand...
That did the trick. Can't believe I didn't try that. Thank you very much
 
Reactions: horse sence
You must log in or register to reply here.

Similar threads

M
  • Locked
2001 evap core tube support
  • mnky99
  • Sep 4, 2025
  • SN95 V6 Mustang Tech
Replies
4
Views
361
SN95 V6 Mustang Tech Sep 5, 2025
mnky99
M
J
For Sale MASTER LISTING: Abandoned '66 Mustang Restomod Part-Out (Wilwood, Ididit, Quick Performance, Mishimoto)
  • JasonB66
  • Jul 23, 2026
  • Suspension
Replies
0
Views
154
Suspension Jul 23, 2026
JasonB66
J
S
Best place to source power steering parts for a '67? (control valve, ram, hoses)
  • SophiaTatum
  • Jun 15, 2026
  • Classic Mustang Specific Tech
Replies
2
Views
102
Classic Mustang Specific Tech Jun 18, 2026
SophiaTatum
S
Who the hell puts the wrong spark plugs in a 3.8L?
  • snowstang
  • Mar 25, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
12
Views
464
1996 - 2004 SN95 Mustang -General/Talk- Apr 3, 2026
LILCBRA
M
2001 v6 heater hose quick connect question
  • mnky99
  • Sep 24, 2025
  • SN95 V6 Mustang Tech
Replies
8
Views
624
SN95 V6 Mustang Tech Sep 26, 2025
mnky99
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?