86 Turbo Coupe To Mustang Diff Swap Question.

Matt01 · Feb 16, 2017

little update:

so i got the diff today!

when i got there, the tranny + head had already been taken, I wonder if the head had been built up. I guess its a mystery

the diff has been swapped according to you guys, I guess thats why the bolts that attach the diff, but not the control arms to chassis came off, the others were well seized.

fun working in the snow! yaay for Canada! we just had a couple big snow storms in the past week so we had our snow suits on..

couldnt believe how rusted the bolts were, borderline sketchy

the actual door sticker if anyone is interested

Davedacarpainter · Feb 16, 2017

Man! Snow sucks!

Nice buy though.

Matt01 · Feb 16, 2017

Davedacarpainter said:
Man! Snow sucks!

Nice buy though.

snow is not so bad, just have to store the car half the year..
i wish it still had its tag on it so i would know if it was a 3.55 or 3.73 though.

90sickfox · Feb 16, 2017

Mark the rotor and the pinion flange and rotate it. Count the turns and bingo !!!

General karthief · Feb 16, 2017

Pop the cover off it the ring gear will be stamped or like 90 said mark the rotor at the top and the pinion at the top and turn the rotor slowly one turn and count the times the pinion turns will get you close, if you want to get real close turn the rotor 10 rotations while someone else counts the turns on the pinion, gets you a better count.

CarMichael Angelo · Feb 16, 2017

** Sigh**

Rotor:

Ring gear:

General karthief · Feb 16, 2017

madmike1157 said:
** Sigh**

Rotor:

Ring gear:

Brake rotor, turn the brake rotor and count the pinion rotations, or open the dif cover and look at the ring gear for gear ratio
To much math involved using the rotor in the distributor.

CarMichael Angelo · Feb 16, 2017

karthief said:
Brake rotor, turn the brake rotor and count the pinion rotations, or open the dif cover and look at the ring gear for gear ratio
To much math involved using the rotor in the distributor.

Ohhhh!!.......... Brake "rotor"......

Now I get it..

I Was thinking that you were calling the ring gear a rotor when you said to open the diff cover and turn the rotor.

Nevermind..

General karthief · Feb 17, 2017

madmike1157 said:
Ohhhh!!.......... Brake "rotor"......

Now I get it..

I Was thinking that you were calling the ring gear a rotor when you said to open the diff cover and turn the rotor.

Nevermind..

It's ok, your similar to that annoying shop teacher that wacks students when they get out of line but they all like him anyway

Mstng93SSP · Feb 17, 2017

Hey @Davedacarpainter , snow doesn't suck? I look at snow all the time on the internet.....

Matt01 · Feb 17, 2017

thanks for the help guys.

I liked the too much math involved comment

General karthief · Feb 17, 2017

Mstng93SSP said:
Hey @Davedacarpainter , snow doesn't suck? I look at snow all the time on the internet.....

Nice weather for nice cars

Mustang5L5 · Feb 17, 2017

Still a nice score either way. I'd just pop the cover and see what's stamped on the ring gear. You're going to need to do this anyway to check out what's inside before you install it.

Hate to put it in and find out it's trashed.

Matt01 · Feb 17, 2017

ya I will have to pop the cover off when I remove the axles anyway. I will update when i find out the gearset. I kind of hope its a 3.73.

FoxChasis · Feb 24, 2017

Driver side of the differential housing there is a "casting" (engineering) number and a date code. That will tell you what it was originally engineered (designed) for and when the housing was cast.

My bet is the engineering number is E6SW and the date code starts with 7 or 8.

FoxChasis · Feb 24, 2017

Door tag code "AX" is "R" which means 3.45:1 w/ Traction-Lok. That's a 7.5" gear ratio. Closest ratio that is for an 8.8" is 3.55:1.

In other words, the rear you pulled from the 1986 TC is not original.

Matt01 · Feb 28, 2017

the ring gear is stampted with FORD E47W AA11 4I ES

can someone point me to a decoder?

90sickfox · Feb 28, 2017

Mark and count the teeth on the ring gear...then count the teeth on the pinion gear. Divide the ring number of teeth by the pinion number. That will give you the gear ratio.

86 Turbo Coupe To Mustang Diff Swap Question.

Matt01

Active Member

Attachments

Davedacarpainter

Chicks can make things hard if they’re inspired...

Matt01

Active Member

90sickfox

Wasn't a pretty sight...and I've got big hands

General karthief

wonder how much it would cost to ship you a pair

CarMichael Angelo

my rearend will smell so minty fresh,

General karthief

wonder how much it would cost to ship you a pair

CarMichael Angelo

my rearend will smell so minty fresh,

General karthief

wonder how much it would cost to ship you a pair

Mstng93SSP

You have a nice rear end there Dave.

Matt01

Active Member

General karthief

wonder how much it would cost to ship you a pair

Mustang5L5

That is…until I whipped out my Bissell

Matt01

Active Member

FoxChasis

FoxChasis

Matt01

Active Member

90sickfox

Wasn't a pretty sight...and I've got big hands

Similar threads

86 Turbo Coupe To Mustang Diff Swap Question.

Active Member

Attachments

Chicks can make things hard if they’re inspired...

Active Member

Wasn't a pretty sight...and I've got big hands

wonder how much it would cost to ship you a pair

my rearend will smell so minty fresh,

wonder how much it would cost to ship you a pair

my rearend will smell so minty fresh,

wonder how much it would cost to ship you a pair

You have a nice rear end there Dave.

Active Member

wonder how much it would cost to ship you a pair

That is…until I whipped out my Bissell

Active Member

Active Member

Wasn't a pretty sight...and I've got big hands

Similar threads

Privacy & Transparency

Privacy & Transparency