88 GT front suspension: Can I swap in lower arm and hub from an LSC?

  • Sponsors (?)


I've never heard of that particular swap, however that doesn't mean it can't be done. You MAY be able to do it using the Lincoln spindles because the LSC rotors won't fit the '88 Mustang 4-lug spindles. Pay attention to strut and tie rod bolt hole locations. You may have to make some modifications to the LSC spindles and/or Mustang struts. You may also have to use those aftermarket adjustable "bump steer" tie rod ends to correct some geometry issues.

Measure, measure, measure and decide if it's worth the work.

If you can weld, cut, and grind metal, it has potential.
 
Last time i looked at LSC front suspension, i can remember it being totally different from a Mustangs. I'm 95% sure it will not work.

But what are your intentions? Just to convert to 5-lug? If your '88 is a 5.0 car then just swap the rotors onto the Mustang spindle. It's as easy as that