• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

88 mustang radio harness color codes???

  • Thread starter Thread starter hotrod101786
  • Start date Start date Dec 8, 2008
  • 1
  • 2
Next
1 of 2 Next Last
H

hotrod101786

New Member
Sep 3, 2008
21
0
0
Dec 8, 2008
#1
  • Dec 8, 2008
  • #1
im trying to put a cd player in my 88 lx 5.0 (california car if that matters). the stock harness connector is cut off and i dont know what wires go to what. i have my red and yellow wires from my cd player hooked up to a yellow/black wire from my mustang harness and my black wire from cd player hooked up to a black/white wire from my mustang harness. it gives the cd player power and the screen works and all and it turns off when i turn the key off like normal, but ive been trying to hook the speaker wires together and im not getting any sound. my thick red wire from my mustang harness is not hooked up to anything, is that what would power my speakers?? i know my speakers work cuz they worked with my previous radio. ive tried to look up radio wire diagrams online and none of the colors are matching up to what i have in my car.
 
H

hotrod101786

New Member
Sep 3, 2008
21
0
0
Dec 8, 2008
#2
  • Dec 8, 2008
  • #2
Posted via Mobile Device ok nevermind, i totally screwed up on the power wiring but i got it figured out. I still cant figure out what stock harness wire colors go to which speaker.
 

Boostedpimp

20+ Year Stangneter
May 8, 2003
1,451
493
154
NJ
Dec 9, 2008
#3
  • Dec 9, 2008
  • #3
I haven't delt with mine yet but I found these that might help you out... when it figure it all out could you post back so in a few weeks when I tackle mine I'll have the info
 

Attachments

  • 88_radio.GIF
    20.9 KB · Views: 11,610
  • 89_radio.GIF
    23.7 KB · Views: 11,219

squeak93

15 Year Member
Jun 2, 2005
2,279
368
164
Joplin, Missouri
Dec 9, 2008
#4
  • Dec 9, 2008
  • #4
Get a 9 volt battery and black tape a small length of speaker wire to it. use the other end to "pop" ur speakers one at a time. Usually there are like colored wires in the factory harness. Now what colors, can vary year to year and even in the same year. Ford was TERRIBLE about changing the harness colors. If u have the power figured out then ur already half way there. U can use the above pics as reference but the quickest way to know is to pop the speaker and make sure u have the right + and -. That way u don't get ur speakers out of phase either. If I were u (I did this in my last fox) I'd go to a junk yard and cut a pig tail for the radio out of another fox and wire that in first. That way u can swap much easier later on if ur radio ever dies.
 

87WhiteStang1

Member
Dec 19, 2007
182
0
16
Dec 9, 2008
#5
  • Dec 9, 2008
  • #5
no sound could mean the factory amp is getting in the way...i had the same problem. you could find the factory amp which is a small amp either behind the head unit or under passenger seat...but the way i did it which was pretty easy was i used some speaker wire i had laying around and i wired every speaker one at a time to the new head unit.. works fine sounds awesome
 

Beasty306GT

Active Member
Dec 19, 2002
671
4
28
Oxford,Mass
Dec 9, 2008
#6
  • Dec 9, 2008
  • #6
use a tester to match the wires....ull get polarity...when i bought my car the same thing happened..the cut the harness off...i figured it out and its been good for yr and half...easiest way to match the speakers
 

hotcobra03

Active Member
Nov 29, 1999
969
4
39
poteet,tx
Dec 9, 2008
#7
  • Dec 9, 2008
  • #7
I can help with colors but cant give a pic . Let me know
 

hotcobra03

Active Member
Nov 29, 1999
969
4
39
poteet,tx
Dec 9, 2008
#8
  • Dec 9, 2008
  • #8
Looked in book and found 3 types of systems for 88 mustang. 1~ plain radio with 4 speakers. 2~premium sound with graphic eq. And 6 speakers. Than premium sound with out eq. 4 speaker is different colors than 6speaker.
 
H

hotrod101786

New Member
Sep 3, 2008
21
0
0
Dec 10, 2008
#9
  • Dec 10, 2008
  • #9
i have 2 speakers up front, 2 in the back, and 2 small ones in my dash( i guess those are tweeters??). heres how i have my cd player wired up: my ground from cd player is hooked to the thick red wire, my constant is hooked to a light green/yellow wire, my ignition is hooked to a yellow/black wire. here are my speaker wires that are left: (light blue/red), (light blue/black), (orange with a very thin light blue stripe), (orange/black), (white/red), (light green), (purple/white). ive tried nearly ever wire combonation and got nothing, but i grabbed a sony xplod 6x9 i had sittin in my house and wired it straight to my cd player and got sound. so im guess maybe the stock mustang amp is out??
 

squeak93

15 Year Member
Jun 2, 2005
2,279
368
164
Joplin, Missouri
Dec 10, 2008
#10
  • Dec 10, 2008
  • #10
Did u wire the amp turn on?
 

hotcobra03

Active Member
Nov 29, 1999
969
4
39
poteet,tx
Dec 10, 2008
#11
  • Dec 10, 2008
  • #11
Have you located the amp? Radio feed amp .are you going to use amp? From cell i will try my best . I will start with speakers.after that amp power.
 

hotcobra03

Active Member
Nov 29, 1999
969
4
39
poteet,tx
Dec 10, 2008
#12
  • Dec 10, 2008
  • #12
At 8 pin connector on amp to speakes. 2 colors are used twice?it will take 2 posts.looking into connector,plug looks like a backwards L .rightside top to bottom.801.803.805.813. Left side811.806.804.807.
 

hotcobra03

Active Member
Nov 29, 1999
969
4
39
poteet,tx
Dec 10, 2008
#13
  • Dec 10, 2008
  • #13
Lf+804 o/lg.-813lt blue/w.Rf+805 w/lt green.-811 dgreen/o.Lr+807 pink/lt pink.-801 pink/lt blue.RR+806pink/lt blue.-dk green/o.
 
H

hotrod101786

New Member
Sep 3, 2008
21
0
0
Dec 10, 2008
#14
  • Dec 10, 2008
  • #14
i havent located the amp yet, im at work rite now jumpin on the computer when i get a chance. is there a wire for amp power?? also, someone told me there is a fuse on the amp, is that true?
 
H

hotrod101786

New Member
Sep 3, 2008
21
0
0
Dec 10, 2008
#15
  • Dec 10, 2008
  • #15
my amp is located behind the the radio. its kinda hard to get to tho. i was gonna use the wires that are coming out of amp to the speakers. do i just wire my dash speakers in with my front door panel speakers??
 

hotcobra03

Active Member
Nov 29, 1999
969
4
39
poteet,tx
Dec 10, 2008
#16
  • Dec 10, 2008
  • #16
Ok here is where it get tricky .was a graphic eq with head unit?
 
H

hotrod101786

New Member
Sep 3, 2008
21
0
0
Dec 10, 2008
#17
  • Dec 10, 2008
  • #17
hotcobra03 said:
Lf+804 o/lg.-813lt blue/w.Rf+805 w/lt green.-811 dgreen/o.Lr+807 pink/lt pink.-801 pink/lt blue.RR+806pink/lt blue.-dk green/o.
Click to expand...

im just gonna wire my cd player straight to these wires ^^^^^ how did you get to this connection tho? that amp is in there pretty tight and its tough for me to get to.
 

squeak93

15 Year Member
Jun 2, 2005
2,279
368
164
Joplin, Missouri
Dec 10, 2008
#18
  • Dec 10, 2008
  • #18
Your dash speakers should be the same wires as ur door speakers.. But since its an eq car, i am not for sure. I have never messed with a eq car. If I were u, i'd just rewire all the speakers myself, buy a nice componet set for the front and go from there.
 

hotcobra03

Active Member
Nov 29, 1999
969
4
39
poteet,tx
Dec 10, 2008
#19
  • Dec 10, 2008
  • #19
Ok now my head hurts. You make the call here. Stock system was one channel.the factory amp turns it to 2 channel front and rear. No quad sound will happen if amp is used. The factor eq had fader.this is tricky.are all the plugs cut? And all those wires you are using in 1 harness?
 

87WhiteStang1

Member
Dec 19, 2007
182
0
16
Dec 10, 2008
#20
  • Dec 10, 2008
  • #20
the best thing for you to do right now is to get some speaker wire and wire your speakers straight to your new head unit...the factory amp and wiring is so confusing its just a waste of time...for the front door speakers and dash speaker just wire them together.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

Electrical Ron Francis Headlight / Alternator Harness
  • dan50
  • Apr 30, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
227
Fox 5.0 Mustang Tech Apr 30, 2026
dan50
C
Electrical HELP! 1989 5.0 Stick, Voltage Bleed onto Ignition Trigger wire
  • ChickenDeluxe
  • May 14, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
239
Fox 5.0 Mustang Tech May 24, 2026
ChickenDeluxe
C
U
No fuel pump relay in harness
  • Uli661
  • May 18, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
159
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 1, 2026
Uli661
U
A
Electrical electric mirror switch issue...
  • alchemist1
  • Apr 18, 2026
  • Fox 5.0 Mustang Tech
Replies
1
Views
117
Fox 5.0 Mustang Tech Apr 19, 2026
2000xp8
C
Electrical Under dash wiring
  • ChicagoMustang
  • Apr 17, 2026
  • Fox 5.0 Mustang Tech
Replies
1
Views
122
Fox 5.0 Mustang Tech Apr 17, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?