Fox 89 Coupe

[txfivelitercoupe]

89 5.0 030 over flat tops with dish,351w pro comp 3037 heads.remachined with twin springs.Edelbrock performer rpm carb. Intake .600 carb.e303 cam.bbk headers.hei distributor conversion.3.08 with t5. Any guesses on horsepower or 1/4 time ?

 

[jrichker]

89 5.0 030 over flat tops with dish,351w pro comp 3037 heads.remachined with twin springs.Edelbrock performer rpm carb. Intake .600 carb.e303 cam.bbk headers.hei distributor conversion.3.08 with t5. Any guesses on horsepower or 1/4 time ?

Do you own this car or are you consider buying it?
If you own it, did you build from scratch or buy someone's project?

HEI distributor? Are you still using the original EFI distributor with a GM add on ignition module?

 

[txfivelitercoupe]

Yes I bought it from someone.the heads had to be fixed.flash burned on head gasket.milled them 010 and replaced all valve train.pistons are 030 .seen it myself

 

[txfivelitercoupe]

Yes I bought it from someone.the heads had to be fixed.flash burned on head gasket.milled them 010 and replaced all valve train.pistons are 030 .seen it myself

Used 69 boss 302 head gaskets with arp

 

[jrichker]

What about the distributor?

 

[Lou95gts]

275 hp 13.50@103mph

 

[txfivelitercoupe]

The distributor is electric ignition with vacumn advance

 

[mikestang63]

you need to provide more information. gears, trans, weight of car, suspension, etc.

 

[txfivelitercoupe]

you need to provide more information. gears, trans, weight of car, suspension, etc.

Stock weight.subframes 3.08 gears.other tahn

 

[txfivelitercoupe]

302 030 over .351w pro comp heads.b303 can.hei distributor with vac. Advance.edelbrock 1405 carb.bbk headers.twin valve springs.2.02 intake 1.60 exhaust. 1.7 rockers .3.08 gears 2980 weight 5 SPD.subframes .king cobra clutch. Any estimates on horsepower or 1/4 times ?

 

[A5literMan]

About 275 rwhp and depending on tires,suspension,your driving ability,and the track could run in the mid to low 13's. You need more gear ratio like a 3.73 or 4.10 if you're just concerned about track times.

 

[txfivelitercoupe]

Thanks.I am considering 4.10s and maybe a 6spd conversion for daily driving I only work a few miles away..at ford .also I have draglites all the way around .15x8 on rear runners up front.my rear spacing is only 3.5 deep.I have seen the 5.5 offset.will it fit with 10.5 slicks without tubs ?