• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

91 Lx With Twisted Wedge Running Like **** Under 2k

  • Thread starter Thread starter gagemotorsports
  • Start date Start date Aug 23, 2016
G

gagemotorsports

New Member
Aug 23, 2016
3
0
1
Aug 23, 2016
#1
  • Aug 23, 2016
  • #1
Hey guys,

New to the forum and just picked up a 91 LX notch. Had a few back in high school and really wanted another...That said car needs a tune.....or not? Car is almost undrivable under like 2k if im not in the skinny pedal. Over 3k it runs like a champ. Car almost dies every time i come to a stop, cold start runs like crap for like 30 seconds then clears and idles great. When just trying to crusie down my street in 3rd gear at 1800 rpm it bucks jumps. drop it down to 2nd and bring it over 2k its drivable.

This is whats done.
Full top end kit twisted wedge
70mm throtle bodie
30 or 35 lb injectors
High pressure fuel pump
intake and mass air
Shorty headers
full x pipe no cats with flowmasters
MSD ignition setup

Im pulling the motor in winter and probably gonna put a charger on it so i really dont want to spend $800.00 to have it tuned at a shop. I do have a Bama tuner that i can send back and get a close tune for my set-up but i know people have done the same as me and wanted to see if anyone had any suggestions on what i can possibly do without a tuner to get this thing to run right...or if a tune is the only option.
Thanks in advance for the help
Eric
 

Davedacarpainter

Chicks can make things hard if they’re inspired...
SN Certified Technician
Nov 28, 2015
11,833
11,633
203
Discordia
Aug 23, 2016
#2
  • Aug 23, 2016
  • #2
The injectors are kind of big, don't you think?

I'm going to move your thread to the tech side. You'll get more of the detailed help there.
 

FoxMustangLvr

I love my Pimp
SN Certified Technician
Oct 14, 2012
4,968
3,514
204
Spokane, Wa
Aug 23, 2016
#3
  • Aug 23, 2016
  • #3
gagemotorsports said:
Hey guys,

New to the forum and just picked up a 91 LX notch. Had a few back in high school and really wanted another...That said car needs a tune.....or not? Car is almost undrivable under like 2k if im not in the skinny pedal. Over 3k it runs like a champ. Car almost dies every time i come to a stop, cold start runs like crap for like 30 seconds then clears and idles great. When just trying to crusie down my street in 3rd gear at 1800 rpm it bucks jumps. drop it down to 2nd and bring it over 2k its drivable.

This is whats done.
Full top end kit twisted wedge
70mm throtle bodie
30 or 35 lb injectors
High pressure fuel pump
intake and mass air
Shorty headers
full x pipe no cats with flowmasters
MSD ignition setup

Im pulling the motor in winter and probably gonna put a charger on it so i really dont want to spend $800.00 to have it tuned at a shop. I do have a Bama tuner that i can send back and get a close tune for my set-up but i know people have done the same as me and wanted to see if anyone had any suggestions on what i can possibly do without a tuner to get this thing to run right...or if a tune is the only option.
Thanks in advance for the help
Eric
Click to expand...
Some of the driveability issues sound like it could be cam related. With some high rev high lift cams you will have bog issues below 2k rpms. Do you know what cam you have? What gears are currently installed in your rear axle? Some cams (like a TFS stage 2 cam) require a 3.73 ring and pinion because the cam doesn't really make power until 2,500+ rpms. The car will buck like crazy with stock gears.

As far as crappy idle and grumpy cold starts, have you checked for codes? A lot of people here will tell you that Bama tunes aren't any good and can cause more driveability issues than they solve.
 

FoxMustangLvr

I love my Pimp
SN Certified Technician
Oct 14, 2012
4,968
3,514
204
Spokane, Wa
Aug 23, 2016
#4
  • Aug 23, 2016
  • #4
Davedacarpainter said:
The injectors are kind of big, don't you think?

I'm going to move your thread to the tech side. You'll get more of the detailed help there.
Click to expand...
If he has 36# injectors on a 302 engine then that'd be big. I have 30# injectors on my HCI 306 engine which will work just fine with a tune.
 
Reactions: Davedacarpainter
G

gagemotorsports

New Member
Aug 23, 2016
3
0
1
Aug 23, 2016
#5
  • Aug 23, 2016
  • #5
Thanks so far for the responses. I will look up the cam info tonight when I get home. I did confirm I had 30lb injectors and I know i have 3.73's in the rear.
 

FoxMustangLvr

I love my Pimp
SN Certified Technician
Oct 14, 2012
4,968
3,514
204
Spokane, Wa
Aug 23, 2016
#6
  • Aug 23, 2016
  • #6
How to pull codes sticky
http://www.stangnet.com/mustang-for...codes-from-eec4-in-86-95-5-0-mustangs.889006/
 

Davedacarpainter

Chicks can make things hard if they’re inspired...
SN Certified Technician
Nov 28, 2015
11,833
11,633
203
Discordia
Aug 23, 2016
#7
  • Aug 23, 2016
  • #7
FoxMustangLvr said:
If he has 36# injectors on a 302 engine then that'd be big. I have 30# injectors on my HCI 306 engine which will work just fine with a tune.
Click to expand...
Do you have forced injection? I need to go back through your thread I guess.

Bah, what do I know with two carbed foxes anyhow!

I've just read anything above a 24 would be large for a stock sized engine. Does the top end open it up well enough then to use that large of an injector? I ask this sincerely, btw.
 
G

gagemotorsports

New Member
Aug 23, 2016
3
0
1
Aug 23, 2016
#8
  • Aug 23, 2016
  • #8
Davedacarpainter said:
Do you have forced injection? I need to go back through your thread I guess.

Bah, what do I know with two carbed foxes anyhow!

I've just read anything above a 24 would be large for a stock sized engine. Does the top end open it up well enough then to use that large of an injector? I ask this sincerely, btw.
Click to expand...

Once above 2500rpm it really does pull hard and run great.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,249
17,934
224
Massachusetts
Aug 23, 2016
#9
  • Aug 23, 2016
  • #9
What fuel pressure you running?

Dump the codes and lets start from there
 

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
Aug 23, 2016
#10
  • Aug 23, 2016
  • #10
two words- BAMA tune
 

deathb4dismount

Crap, didn’t realize my crotch was in that picture
15 Year Member
Oct 6, 2011
1,031
502
164
THE BUCKET
Aug 23, 2016
#11
  • Aug 23, 2016
  • #11
I had same problem recently, and it was the iac causing the issue. Don't skimp if you are replacing, buy motorcraft. Pull the codes and as it can help you avoid spending money where you dont have to.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Aug 24, 2016
#12
  • Aug 24, 2016
  • #12
The first step is to do the diagnostic legwork: DUMP THE CODES!!!

You guys with idle/stall problems could save a lot of time chasing your tails if you would go through the Surging Idle Checklist. Over 50 different people contributed information to it. The first two posts have all the fixes, and steps through the how to find and fix your idle problems without spending a lot of time and money. It includes how to dump the computer codes quickly and simply as one of the first steps. I continue to update it as more people post fixes or ask questions. You can post questions to that sticky and have your name and idle problem recognized. The guys with original problems and fixes get their posts added to the main fix.

It's free, I don't get anything for the use of it except knowing I helped a fellow Mustang enthusiast with his car. At last check, it had more than 200,000 hits, which indicates it does help fix idle problems quickly and inexpensively.
 
You must log in or register to reply here.

Similar threads

Engine 1990 LX 5.0L EFI Mustang Fuel Management Problems - HELP!
  • 5.0LXStanger
  • May 25, 2025
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
45
Views
2K
Fox 5.0 Mustang Tech Jul 11, 2025
5.0LXStanger
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
2K
1965 - 1973 Classic Mustangs -General/Talk- Thursday at 9:44 PM
Noobz347
Idle shoots to 1800 rpms, 3 seconds after startup. CEL flashes 3 times
  • 1995COBRA
  • Apr 28, 2023
  • 1994 - 1995 Specific Tech
Replies
3
Views
1K
1994 - 1995 Specific Tech Sep 9, 2023
AeroCoupe
Engine A few issues with my new 88 Foxbody that i couldnt find definitive answers to....
  • AydenTv
  • Mar 6, 2022
  • Fox 5.0 Mustang Tech
Replies
6
Views
2K
Fox 5.0 Mustang Tech May 23, 2022
7991LXnSHO
Betty white budget build
  • Stevenmverrill
  • Jun 16, 2023
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 15, 2023
2Blue2
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?