- Sep 3, 2009
- 0
- 0
- 0
-all original vin tags are still in place
-have original hood
-clean title
-numbers matching car
-vermillion red
Drivetrain:
-tremec tko 600
-pro 5.0 shifter
-hurst shifter and white knob
-lakewood blowproof bellhousing
-spec stage 3 clutch
-spec billet steel flywheel
-aluminum driveshaft
-3:73 gears
-mosier 31 spline axles
-lakewood driveshaft saftey loop
Engine:
-70 mm on3 performance turbo kit
-3 inch single bullet muffler
-saleen intake polished
-70 mm throttle body
-promass blowthrough meter calibrated for 60lb inj.
-60lb denso high impedence injectors
-paxton fuel regulator
-255 walboro fuel pump in tank
-msd pro billet dist.
-msd digital 6 ignition box- (needs to be sent to msd to be fixed)
-auto meter phantom gauges
Oil pressure, fuel press, water temp, and boost
-edelbrock high flow water pump polished
-mach altenator pulley kit
-intercooler 10" fan
-howe aluminum radiator
Interior:
-Hang em' High roll cage 8 point
-G force camlock racing harnesses
Wheels and body:
-Billet specialties street lites 2-15x10 2-15x3.5
-BFG drag radial 275-50-15 ( have MT ET Streets also )
-2.5 inch harwood hood
-all headlight are fairly new oem ford lights
-ford racing 1.5 inch lowering springs
Issues :
-MSD needs to be sent back to msd (not sure what the issue is)
-Brake line leak
-Needs intake gasket
-sometimes pops out of reverse
text or call (606)872-2172 or e-mail [email protected]
will e-mail or text pictures.
$ 7600
ran 12.00's at 120
never dynoed
trades considered
Have a few additional parts for a litttle extra $
Pictures by slowoh - Photobucket
-have original hood
-clean title
-numbers matching car
-vermillion red
Drivetrain:
-tremec tko 600
-pro 5.0 shifter
-hurst shifter and white knob
-lakewood blowproof bellhousing
-spec stage 3 clutch
-spec billet steel flywheel
-aluminum driveshaft
-3:73 gears
-mosier 31 spline axles
-lakewood driveshaft saftey loop
Engine:
-70 mm on3 performance turbo kit
-3 inch single bullet muffler
-saleen intake polished
-70 mm throttle body
-promass blowthrough meter calibrated for 60lb inj.
-60lb denso high impedence injectors
-paxton fuel regulator
-255 walboro fuel pump in tank
-msd pro billet dist.
-msd digital 6 ignition box- (needs to be sent to msd to be fixed)
-auto meter phantom gauges
Oil pressure, fuel press, water temp, and boost
-edelbrock high flow water pump polished
-mach altenator pulley kit
-intercooler 10" fan
-howe aluminum radiator
Interior:
-Hang em' High roll cage 8 point
-G force camlock racing harnesses
Wheels and body:
-Billet specialties street lites 2-15x10 2-15x3.5
-BFG drag radial 275-50-15 ( have MT ET Streets also )
-2.5 inch harwood hood
-all headlight are fairly new oem ford lights
-ford racing 1.5 inch lowering springs
Issues :
-MSD needs to be sent back to msd (not sure what the issue is)
-Brake line leak
-Needs intake gasket
-sometimes pops out of reverse
text or call (606)872-2172 or e-mail [email protected]
will e-mail or text pictures.
$ 7600
ran 12.00's at 120
never dynoed
trades considered
Have a few additional parts for a litttle extra $
Pictures by slowoh - Photobucket