94-5 mass air the same as 89-93

W

whitenblu89

Member

Jul 25, 2003

70

0

6

westland mi

Jun 17, 2004

#1

• Jun 17, 2004

• #1

94-5 mass air not the same as 89-93

i just went to the yard and bought a mass air meter from a 94 mustang and when i got home it is the same size as the stock one on my 89 gt so im kinda pissed that i wasted my time and money on this meter and the adapter so if anybody i looking for a meter to do a swap let me know. the yard may have given me the wrong meter so if someone has a pic of a stock 94-95 mass air meter post a pic or send one to mustangracr@hotmail.com. thanks

 

X

xherdlr

New Member

May 19, 2003

159

0

0

Hendersonville,Nc

Jun 17, 2004

#2

• Jun 17, 2004

• #2

I just bought a used Pro M for a 94-95 and I need the adaptor. It wont fit my Mac cold air kit on my 89. The meter you bought will work...

Kelly

 

W

whitenblu89

Member

Jul 25, 2003

70

0

6

westland mi

Jun 17, 2004

#3

• Jun 17, 2004

• #3

could somebody please post a pic of the inside of a stock mass air meter i dont care if it is 88-93 or 94-95 because either way i can tell if the one i bought is the right one or if the one on the car is not stock. thanks

 

5 Liter Mustang

New Member

Aug 17, 2003

119

0

0

Jun 17, 2004

#4

• Jun 17, 2004

• #4

was it a "pick-your-part" junkyard, or did they go and get the part for you.

if they got the part for you, and you asked for a 94+, they probably just got you a 93- mass air meter because they know it will work on a 94+. the 94+ should be a larger diameter though, so i think you got screwed.

 

jrichker

StangNet's favorite TOOL

In Remembrance. Thank you for your contributions

Mar 10, 2000

27,512

2,813

234

Dublin GA

Jun 17, 2004

#5

• Jun 17, 2004

• #5

89-93 MAF is slip connectors on both ends for the air duct. It has a 55 MM opening.

94-95 Mustang GT MAF - $40-$100. It is 70 MM instead of the stock 55 MM on regular stangs built prior to 94. It uses a slip on duct on the side that goes to the throttle body and a 4 bolt flange on the other. You need a $25-$35 flange adapter from Pro-M to fit the stock slip on air ducting that goes to the air box. Wiring plugs right in with no changes.

Pro-M has revised their website lately, but here's what I found.

http://performancepartsmall.com/detail.asp?id=224 plastic adapter

http://performancepartsmall.com/detail.asp?id=223 metal adapter.

I got a metal one from Powered by Ford for $35 and tax. That was about a year ago.

Powered By Ford
1516 South Division Avenue
Orlando, FL 32805
Hours 0800-1800
Phone 407-843-3673
http://www.poweredbyford.com/

 

W

whitenblu89

Member

Jul 25, 2003

70

0

6

westland mi

Jun 18, 2004

#6

• Jun 18, 2004

• #6

the one i bought has the slip fit on one side and th flange on the other and i even went out and bought the adapter. so now im stuck with both. the one they sold me is the same size that on my car stock.

 

jrichker

StangNet's favorite TOOL

In Remembrance. Thank you for your contributions

Mar 10, 2000

27,512

2,813

234

Dublin GA

Jun 18, 2004

#7

• Jun 18, 2004

• #7

whitenblu89 said:

the one i bought has the slip fit on one side and th flange on the other and i even went out and bought the adapter. so now im stuck with both. the one they sold me is the same size that on my car stock.

Click to expand...

Measure the MAF opening. At 25 mm per inch, 55 mm is about 2 3/16" - a little.

A 70 mm MAF would be a little less than 3", somewhere around 2 3/4"

 

W

whitenblu89

Member

Jul 25, 2003

70

0

6

westland mi

Jun 18, 2004

#8

• Jun 18, 2004

• #8

the outside opening is 70 mm but inside it tapers down to 55mm so is this how it is supposed to be or is it supposed to be 70mm all the way through i really need a picture of a 94-95 mass air meter

 

W

whitenblu89

Member

Jul 25, 2003

70

0

6

westland mi

Jun 18, 2004

#9

• Jun 18, 2004

• #9

i foud what happend. their computer lists 92-up grand marquis and crown vics as having the same mass air meter as a 94 mustang so they gave me one off of a 92 marquis im going tomorrow to return it.