94-98 with wheel spacers

[Blackone51]

Anyone in here with 94-98 body style have the 1 inch wheel spacers? How do you like them and does anyone have pics with the 315 rear tires? Thanks, I am trying to decide if I like them or not. My girlfriend says it will look like those trucks with the wheels sticking way out.

 

[98COBRA281]

i have 1-1/4in, with a 17x9 rims and 275 tire

my car is the one with the silver cobra R's

 

[Blackone51]

Have any pics of the back cobra281?

 

[GDawg]

I have 25mm and with stock 245s they sit perfectly flush. So, 315s would probably stick out.

 

[LI98GTStang]

Have any pics of the back cobra281?

Not coba281, but I've got the same 17x9 (275/40s) and 1.25" wheel adapters installed. Here are some butt shots. Sticks out ever so slightly.

 

[98COBRA281]

^ thanks, because i acually dont have any rear shots of my car.....

 

[RDinTN]

My '99 Gt has 245/17's with 38mm (1.5") spacers in the rear. Tires extend about 3/8". Look good but about at the edge of believability. Your 315's would extend another 2 3/4" and look not unlike a skateboard.

 

[EPIK]

Not coba281, but I've got the same 17x9 (275/40s) and 1.25" wheel adapters installed. Here are some butt shots. Sticks out ever so slightly.

Man I love that color...Your car looks great....



Sorry to derail... To the OP, if u want to get wheel spacers that thick, u need to run smaller tires....

I had 17X10.5's with 315's on my 95. I ran a 1/4" wheel spacer & it sat perfect....

 

[Blackone51]

So would 1 inch spacers be ok on 315s and not stick out?

 

[EPIK]

So would 1 inch spacers be ok on 315s and not stick out?

What size wheels do u have?

 

[Blackone51]

What size wheels do u have?

I have the 17 by 9 front and 17 by 10.5 in the rear.

 

[EPIK]

I have the 17 by 9 front and 17 by 10.5 in the rear.

Ok if thats the case, 1/4" to 1/2" spacer tops. Any more would look like a roller skate IMO...

 

[Blackone51]

Ok if thats the case, 1/4" to 1/2" spacer tops. Any more would look like a roller skate IMO...

Ok thanks alot .

 

[EPIK]

Ok thanks alot .

No prob. just remember that if you do 1/4" spacers u can still use the stock studs, but 1/2" u will have to install longer & stronger wheel studs.... I will see if I can find pics of my 95 when it had the spacers but I dont think I ever got pics.... 1/4" with 315's & 17X10.5's looked perfect IMO...

 

[four six]

17x10.5 with 1/4 MM spacers

 

[LI98GTStang]

Man I love that color...Your car looks great....



Sorry to derail... To the OP, if u want to get wheel spacers that thick, u need to run smaller tires....

I had 17X10.5's with 315's on my 95. I ran a 1/4" wheel spacer & it sat perfect....

Appreciate the props and right back at you EPIK. As far as these spacers/adapters go, why not mount them up and see what's needed to get them flush if that's the look your going for?

 

[EPIK]

17x10.5 with 1/4 MM spacers

That is the exact setup i had on my 95....

 

[four six]

That is the exact setup i had on my 95....

Best way too. MM suggests no more than 1/4" spacers on stock studs.