94 cobra Epoxy coat on INSIDE?!?! of intake runners???

G

gatorbytes2

New Member

May 1, 2005

26

0

0

Magnolia Delaware

Feb 26, 2006

#1

• Feb 26, 2006

• #1

Hello all, Upon removal of my 94 upper intake I noticed the epoxy coat was cracking and easily peeling on the INSIDE of the intake runners??!?!?! How in the world do I go about having this removed? acid dipping? If I dont remove it, I have a feeling it will deffinatly end up in the motor (if it hasnt already) crapola

 

Attachments

• dscn06061zf.webp

  2.8 KB · Views: 110

G

gatorbytes2

New Member

May 1, 2005

26

0

0

Magnolia Delaware

Feb 27, 2006

#2

• Feb 27, 2006

• #2

bump

 

urban96

bubb rubb says:"woo woooooo"

Founding Member

Sep 24, 2002

3,464

1

69

Syracuse, NY

Feb 27, 2006

#3

• Feb 27, 2006

• #3

i dont think mine had any coating inside the runners.. you aure its not just carbon build up?

 

MysteryMachine

Active Member

Jun 21, 2003

1,835

2

39

Parkesburg, PA

Feb 27, 2006

#4

• Feb 27, 2006

• #4

aftermarket intake time lol. My GT intake didn't have anything in there may be different on the cobra's but i kinda doubt it. Like Urban said maybe its build up. Spray some brake cleaner in the runners and see if it cleans it out

 

go-stang5.0

New Member

Jan 27, 2003

2,244

0

0

Glenview,Il

Feb 27, 2006

#5

• Feb 27, 2006

• #5

Never seen that before...There should be no coating inside for that specific reason (if it comes off, it will go in the motor). I agree with the carbon build up theory or some sort of buildup anyways. Try using solvent, carb cleaner, or sea foam to clean it out.

 

go-stang5.0

New Member

Jan 27, 2003

2,244

0

0

Glenview,Il

Feb 27, 2006

#6

• Feb 27, 2006

• #6

somehow I think that 175 wet shot has something to do with the "build up".

 

G

gatorbytes2

New Member

May 1, 2005

26

0

0

Magnolia Delaware

Feb 27, 2006

#7

• Feb 27, 2006

• #7

hmm

Well guys, I sprayed it all down with carb cleaner, its still there upon inspection (and peeling a bit off with finger, its deffinatly the same exact coating thats on the outside (nice clean aluminum underneath).
Strange... it only seems to be on the upper intake, the lower is clean as a whistle. all i can figure is ford put it there to smooth the intake runner (in place of polishing to remove casting flash) and maybe to prevent heat? either way it SUCKS that its cracking , so im gonna try to call my engine builder to see if maybe he can hot tank it to get the coating off.

 

WHITE94COBRA

New Member

Nov 14, 2003

816

0

0

HUNTINGTON BEACH

Feb 27, 2006

#8

• Feb 27, 2006

• #8

My stock cobra intake doesnt have that???? Thats weird.

 

G

gatorbytes2

New Member

May 1, 2005

26

0

0

Magnolia Delaware

Feb 27, 2006

#9

• Feb 27, 2006

• #9

WHITE94COBRA said:

My stock cobra intake doesnt have that???? Thats weird.

Click to expand...

LOL figures my cars gotta be "different"