Long story short, i have an off road x pipe and am looking to remove the air pump that is pumping air to the ground,
I allready have the steeda idler pulley,
when i replace the pump with it can i yank everything connected to the air pump and just plug the two holes on the heads and the vacuum linke on the intake manifold?
or is there another leak i have to worry about
tia
I allready have the steeda idler pulley,
when i replace the pump with it can i yank everything connected to the air pump and just plug the two holes on the heads and the vacuum linke on the intake manifold?
or is there another leak i have to worry about
tia
