95 GT Fuel Lines

[oleydd970]

Does anybody know of an AN fuel line set that goes from the hard steel lines in the engine compartment to aftermarket fuel rails. Basicly what i really need is the fitting on the fuel line side, that has little plastic removeable clip, to an AN type fitting. I need both supply and return lines as they are different sizes. My fuel rails have a NPT fitting so converting it to AN is simple. The line sets for 87-93 are different, they are the push to lock type. Anybody with a solution for my problem would be gratefully appreciated.

 

[parchisi]

I tried hard to find the same thing when hooking up my fuel lines, but to no avail. You can get some kind of end that you can connect to the metal lines where you have to flange the ends of the line, but I ended up just running all new lines from the tank.

 

[mootang]

the bbk rail kit will hook up to your stock lines. other than that i don't know.

 

[oleydd970]

yeah, I've been lookling real hard too. I cant find anything. Any idea on the price for running new lines from the tank. Aeromotive wants like $1500, anybody kmow of cheaper solution?

 

[parchisi]

Just buy some 8an feed line, and 6 an return line. I wasn't sure how to hook up the lines to the lines coming from the fuel pump. so I cut the braided part from the fuel pump and used some hose ends and adapters to hook up the new lines. It worked for a while but then realized it was leaking fuel, so I had to end up using a crimp on the end of that feed line from the pump.

 

[sewngo]

Russel makes a part to go from 5/16 hard line connector (near shock tower ) to -6an fitting.No fitting for the smaller 1/4 return line.