• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

97 cobra ticking...still...HELP PLEASE

  • Thread starter Thread starter stang_me1990
  • Start date Start date Jun 20, 2004

stang_me1990

New Member
Mar 16, 2004
18
0
0
Boscobel, WI
Jun 20, 2004
#1
  • Jun 20, 2004
  • #1
i have a 97 cobra..when you start it it makes a ticking noise..sounds like a lifter noise but i have just replaced the lifters,rockers,injectors and imrc box. i replaced the imrc box first and the noise was still there (could it be the imrc plates themselves??)..the car has a 4r70w in it so i didnt really want to loose anymore lowend by deleting them..so then we replaced lifters,rockers and injectors..they all looked fine but thought just incase..at idle it you can really hear the tick but if you bring up the rpm's a little it starts to go away..i dont know if anyone has heard of this problem or not but it is startin to t me off..any suggestions would be great and greatly appreciated
the car has cobra crank,eagle rods and je pistons..full mac exhaust..k-member..4.10's..msd wires..frame connectors and a baummanator for the tranny
thanks for any help, mike
 
A

Acer2428

New Member
Mar 24, 2004
20
0
0
Jun 20, 2004
#2
  • Jun 20, 2004
  • #2
Ticking could be an exhaust leak, but usually you can hear that through the whole rpm range. Check your connections between the H pipe and the exhaust manifolds.
 

stang_me1990

New Member
Mar 16, 2004
18
0
0
Boscobel, WI
Jun 21, 2004
#3
  • Jun 21, 2004
  • #3
ok..i'll give that a look...any other suggestions would be great..thanks
 

Ryan02Stang

Active Member
Jun 17, 2003
1,181
0
36
Arlington Heights, Illinois
Jun 21, 2004
#4
  • Jun 21, 2004
  • #4
Check the cam timing chain tensioner. Is it a sewing machine noise???
 

stang_me1990

New Member
Mar 16, 2004
18
0
0
Boscobel, WI
Jun 21, 2004
#5
  • Jun 21, 2004
  • #5
the tensioners all look good..chains are all tight..no it sounds more like a lifter tick..almost like the butterflys on the imrc's fluttering..has anyone heard of the imrc plates making that noise?..thanks
 
S

SRMobile

Trend Micro poster child
Jun 1, 2004
0
0
16
Jun 21, 2004
#6
  • Jun 21, 2004
  • #6
The best thing you can do... Is ignore the problem and it will go away..

Sorry bro, have no idea, hope it works out.
 
S

STEEDA98

Founding Member
Apr 15, 2001
171
0
0
miami
Jun 21, 2004
#7
  • Jun 21, 2004
  • #7
ticking noise

i have a 98...no doubt it's the tensioners.i had mine replaced.i too thought it was a lifter or a valve,but i was wrong.you need to take it to someone who works solely on mustangs and he'll tell you.this is very common in 96-98 dohc's.
 

03-s281

New Member
Jan 20, 2004
421
0
0
Stangville,TN
Jun 21, 2004
#8
  • Jun 21, 2004
  • #8
The dohc 4.6 in my old MarkVIII did that for 4 years. I'd start it in the morning and I'd hear loud ticking for maybe 3-5 seconds and it would go away. Everybody said it was the lifters. I beat on that car for 5 years and never had one problem.
 

GoBabyVroommm

Active Member
Mar 22, 2003
1,156
0
36
Chicago, For Realss???!!!
Jun 21, 2004
#9
  • Jun 21, 2004
  • #9
My ticks when i'm in a high gear going slow. I would like to think its a exhaust leak but its not. Owell the car runs if it blows it blows i'll get a stroker kit.
 

stang_me1990

New Member
Mar 16, 2004
18
0
0
Boscobel, WI
Jun 21, 2004
#10
  • Jun 21, 2004
  • #10
is it all the tensioners or just certain ones?..it doesnt just do it at start up..it just starts to be less noticable when you start to bring the rpm's up..i have another engine out back so if i need to replace the tensioners its not that big of a deal or if they are bad i can order new..thanks alot for the ideas..any other input would be gcool too..thanks, mike
 
S

STEEDA98

Founding Member
Apr 15, 2001
171
0
0
miami
Jun 22, 2004
#11
  • Jun 22, 2004
  • #11
don't quote me on this,but i think there are 2 tensioners.
 
You must log in or register to reply here.

Similar threads

W
2003 Mustang GT issues
  • westberry23
  • Aug 25, 2025
  • SN95 4.6L Mustang Tech
Replies
5
Views
288
SN95 4.6L Mustang Tech Sep 24, 2025
squeak93
J
'96 Cobra: A/C gets weak and engine misfires under load when warm
  • jruhnke
  • Oct 22, 2025
  • SVT Tech Forum
Replies
2
Views
303
SVT Tech Forum Nov 20, 2025
nickyb
A
Rough idle - cylinder 1 and 6 misfire HELP
  • austindavies935
  • Jul 24, 2025
  • SN95 4.6L Mustang Tech
Replies
12
Views
673
SN95 4.6L Mustang Tech Jul 24, 2025
gkomo
What's your tow rig?
  • LILCBRA
  • May 31, 2026
  • Other Auto Tech
Replies
3
Views
117
Other Auto Tech May 31, 2026
LILCBRA
L
Help with 1986 GT 5 Speed Please
  • Lcasada1999
  • Mar 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
248
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?