99/01 cobra intake spacer?

cerp · Jun 19, 2004

does anyone know what company is making the intake spacer for the 99 and up cobras.

goes under the IAC. I need it for new injector space.

5.0's 4 ever · Jun 19, 2004

PHP makes an intake manifold spacer for the 99-01 cobra and 03+ Mach 1. It does not go under the IAC though, it goes between the upper and lower plenum. I run one of my cobra and have been pretty impressed on the torque increase.
www.paulshp.com

mustangrmyk · Jul 15, 2004

Just installed the PHP intake spacer. A really easy, low bucks mod. No dyno yet, but impressive SOTP. Accelerates smoothly and has more torque below 3,000. So far, well worth the money.

Has anyone else tried it?

32VHEMIJR · Jul 16, 2004

I thought of machining one of these like 4 years ago, but I didnt believe it would do much. How do you bolt up the EGR tube after that spacer is on? Doesnt seem like it would reach anymore.
What are your gains?

mustangrmyk · Jul 16, 2004

The EGR pipe has a couple of bends in it that straighten out pretty easy. I read in another forum where the guy took it off and tried to reshape it in a vise but had an awful time getting it to line back up. I just removed the EGR valve from the upper manifold, pulled it to the side and installed the spacer. Very easy. I then took a large prybar, placed a piece if wood on the manifold and carefully pulled the pipe up. It stretched easily. It only needs to move 3/8". Then all I had to do was align the bolt holes and bolt it up. Be sure you can get the bolts in several turns by hand before using the wrench. It all worked fine.

I haven't dyno'ed it yet but SOTP if accelerates smoother and quicker below 3,000.

CrimsonCobra_01 · Jul 16, 2004

how easy of a job is that to do? my buddies got a spacer for his 95 gt but said he aint got the time to put it on? im kinda interested myself

Nazman · Jul 18, 2004

Easy install, the EGR tube takes a bit of persuation but that is all.

Here are a couple of pics:

This photo is with NO spacer in place:

This photo is WITH spacer in place:

All installed:

01TrueBlueCobra · Jul 18, 2004

Nazman said:
Easy install, the EGR tube takes a bit of persuation but that is all.

Here are a couple of pics:

Hey Nazman did you noticed any diffrerence in horsepower and torque. I just want to know if it is worth buying.

Nazman · Jul 18, 2004

01TrueBlueCobra said:
Nazman said:

Easy install, the EGR tube takes a bit of persuation but that is all.

Here are a couple of pics:

Hey Nazman did you noticed any diffrerence in horsepower and torque. I just want to know if it is worth buying.

Click to expand...

Nice down low, for the 80-90 bucks not a bad mod.

budguy1967 · Jul 19, 2004

Why isnt there a spacer made for the 96-98 Cobras? I know that the 99 has a different intake manifold, but it cant be that much different.

tygr1 · Jul 19, 2004

Yeah....what can we do for 96-98s???

Anyone?

DoubleONegative · Jul 19, 2004

I just ordered one...i hope it works with Kenne Bell I plan to get this fall

tmhutch · Jul 20, 2004

tygr1 said:
Yeah....what can we do for 96-98s???

Anyone?

They already have a nice size upper plenum.

Todd

lafear01 · Jul 20, 2004

DoubleONegative said:
I just ordered one...i hope it works with Kenne Bell I plan to get this fall

your kidding right? the kenne bell blower will make your stock intake obsolete...

Nazman · Jul 20, 2004

lafear01 said:
your kidding right? the kenne bell blower will make your stock intake obsolete...

True That Brother!

01_SVT · Jul 28, 2004

any clearnance issues for those who have strut tower braces?

DoubleONegative · Jul 28, 2004

lafear01 said:
your kidding right? the kenne bell blower will make your stock intake obsolete...

yeah i kinda realized what i typed after the fact i ordered the Intake spacer before i made plans to get the KB but thats ok....i think the KB will be more than a good replacement for the spacer...lol

PoorYuppie · Jul 28, 2004

Does anyone have any dyno info on these. last time I herd about these, people were saying that they were loosing peak hp from them on the tumble port intakes (99+).
???

TXSnakeCharmer · Jul 28, 2004

no issues, here is mine http://www.shane.roberts.net/spacer.htm

01_SVT said:
any clearnance issues for those who have strut tower braces?

Hissmann · Jul 28, 2004

I want one for my 98 Cobra. This is not fair. Everyone quit making stuff for our cars. I would at least like one of these. You all with the 99 and newer models get everything. I would like to have a predator too, but i don't see that happening either.

99/01 cobra intake spacer?

cerp

New Member

5.0's 4 ever

The #1 Stunna

mustangrmyk

Member

32VHEMIJR

New Member

mustangrmyk

Member

CrimsonCobra_01

New Member

Nazman

New Member

01TrueBlueCobra

New Member

Nazman

New Member

budguy1967

New Member

tygr1

New Member

DoubleONegative

Active Member

tmhutch

lafear01

Nazman

New Member

01_SVT

Member

DoubleONegative

Active Member

PoorYuppie

TXSnakeCharmer

Hissmann

Similar threads

99/01 cobra intake spacer?

New Member

The #1 Stunna

Member

New Member

Member

New Member

New Member

New Member

New Member

New Member

New Member

Active Member

New Member

Member

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency