99-04 Vortech supercharger on a 96?

[xmikevankuikenx]

I have a 96 4.6 Saleen and want to know if a 99-04 Vortech supercharger will fit? If not, what do I need in order to make it bolt up? Any help will be appreciated.
I know I'll need this bracket, but what else do I need to change out from the kit?

http://www.superchargersonline.com/product_detail.asp?PartNumber=V4FH011-041

Also, will a PI intake work on the SVO heads with the supercharger at about 8 PSI? The ports don't exactly match up.

Thanks

 

[SVT32VDOHC]

I don't think all the components will work from that. 96-98 coil packs. 99-04 coil on plug. and different fuel system.

 

[DropTopPony]

probably a different mounting bracket also.

 

[2002BLGT]

I have a 96 4.6 Saleen and want to know if a 99-04 Vortech supercharger will fit? If not, what do I need in order to make it bolt up? Any help will be appreciated.
I know I'll need this bracket, but what else do I need to change out from the kit?

http://www.superchargersonline.com/product_detail.asp?PartNumber=V4FH011-041

Also, will a PI intake work on the SVO heads with the supercharger at about 8 PSI? The ports don't exactly match up.

Thanks

if you call Vortech I am sure their tech guys can give you a list of all part numbers to make it work , that would be the easiest way to figure out what you need

 

[SaleenGT2001]

blower will work.

you'll need a new bracket

 

[Bad92GT]

I don't think all the components will work from that. 96-98 coil packs. 99-04 coil on plug. and different fuel system.

96-97's are different then 98-04s.. 98 just so happened to have the newer style from 99's on up.. mine does

 

[SVT32VDOHC]

The bracket will be different too.....the timing cover is totally different so the bracket will be different that bolts to it.

 

[xmikevankuikenx]

Thanks for the info. I contacted Vortech and it looks like I'm better off not getting the 99-04 supercharger. Sucks because I had a good deal going. Anyay, I've just decided to suck it up and get the Kenne Bell intercooled it. If you're going to do it....do it right.

 

[xmikevankuikenx]

From Kenne Bell:
"Sorry we don't carry the '96-'98 Mustang Gt kit anymore. It was discontinued about 3 months ago due to problems with the manifold."


ARRRRGGGHHH!!!!

 

[the98stang]

From Kenne Bell:
"Sorry we don't carry the '96-'98 Mustang Gt kit anymore. It was discontinued about 3 months ago due to problems with the manifold."


ARRRRGGGHHH!!!!

Buy one used?????

 

[BennyBlown2v]

From Kenne Bell:
"Sorry we don't carry the '96-'98 Mustang Gt kit anymore. It was discontinued about 3 months ago due to problems with the manifold."


ARRRRGGGHHH!!!!

Even with the PI head swap?

 

[Gearbanger 101]

Even with the PI head swap?

Thought he stated he had SVO heads (which are actually closer to the port configuration of the Non-PI heads? In which case, the ports are different altogether. He could buy himself a set of PI gaskets and lay the across the ports to see if they seal up though....this would be the most inexpensive way of finding out.

 

[BennyBlown2v]

Thought he stated he had SVO heads (which are actually closer to the port configuration of the Non-PI heads? In which case, the ports are different altogether. He could buy himself a set of PI gaskets and lay the across the ports to see if they seal up though....this would be the most inexpensive way of finding out.

I took it he was just asking if his PI intake would fit on SVO heads if he was to buy them. His sig says he has PI intake and Heads!

 

[Gearbanger 101]

My mistake.