• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

a couple questions

  • Thread starter Thread starter VulcanGT
  • Start date Start date Oct 1, 2005

VulcanGT

New Member
Jul 13, 2005
16
0
0
Lexington, KY
Oct 1, 2005
#1
  • Oct 1, 2005
  • #1
im thinking of getting a shot of N2O. the problem is that i have 125,000 miles on the car. is it a bad idea to add N2O to my motor with that many miles? also ive heard that putting nitrous on an auto screws with the computer somehow. anyone had any problems like that?

one more dumb question: my fender emblems have turned yellow so im replacing them. what do you use to make them stick to car?

thanks for reading
 

2L8ULUZ2

Will kiss Moderator ass for title
Founding Member
Sep 24, 2000
3,033
14
99
WNC
Oct 1, 2005
#2
  • Oct 1, 2005
  • #2
VulcanGT said:
im thinking of getting a shot of N2O. the problem is that i have 125,000 miles on the car. is it a bad idea to add N2O to my motor with that many miles? also ive heard that putting nitrous on an auto screws with the computer somehow. anyone had any problems like that?

one more dumb question: my fender emblems have turned yellow so im replacing them. what do you use to make them stick to car?

thanks for reading
Click to expand...

Ok first off I would do a compression check and see what it looks like before you think about adding a power adder. If all the numbers look good then I say go for it. Just keep the shot down and make sure you don't detonate. A colder spark plug with a tighter gap is also cheap insurance as well. And I have never seen nitrous screw with a auto trans if used properly. I would use a wot switch that way it only sprays when you are at wide open throttle and make sure you are at or above 3k rpm's. I used a 150 shot on a 75K motor with no problems at all you just have to keep an eye on your tune and check your plugs often. To attach the emblems get some 3M molding and trim two sided tape and make sure the area is good and clean and it will hold them in place just fine.
 

VulcanGT

New Member
Jul 13, 2005
16
0
0
Lexington, KY
Oct 4, 2005
#3
  • Oct 4, 2005
  • #3
thanks for the reply man
 

94GTLaserRC

Squint as you approach, lest you be blinded by my
15 Year Member
May 7, 2002
11,178
13
89
Ernan Says "here it comes... dushbag"
Oct 4, 2005
#4
  • Oct 4, 2005
  • #4
Like Robbie Said, you NEED the compression..maybe even a leak down test. There are lots of guys on here with 100+K miles on the car. JR has had a Vortech, KB, and now Turbo. He runs it hard but has it tight, and well over that mileage. Just CAREFUL!!

RC
 
You must log in or register to reply here.

Similar threads

Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
614
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
S
CFI to carb conversion question
  • StockerStang
  • Mar 23, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
499
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 11, 2025
AeroCoupe
0
V6 to V8 Swap info
  • 02_2v_Curtis
  • Jan 11, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
589
1996 - 2004 SN95 Mustang -General/Talk- Jan 11, 2026
02_2v_Curtis
0
Did an auto reset procedure earlier, few questions
  • from6to8
  • Jun 19, 2024
  • 1994 - 1995 Specific Tech
Replies
0
Views
350
1994 - 1995 Specific Tech Jun 19, 2024
from6to8
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
45
Views
2K
1965 - 1973 Classic Mustangs -General/Talk- Feb 4, 2026
nickyb
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?