A few 5.4 questions...

[Trav4011]

I know that the 5.4 SOHC swap has been covered a good bit.. but, searching hasn't yielded the results I'm looking for..

Basically, I need to know if any company has a spacer/adaptor to use the 4.6 SOHC GT intake manifold on the 5.4 SOHC engine?

The reason that I ask.. is because I have a chance to pick up a 2000 Lightning 5.4 for next to nothing.. and I'm considering this swap, versus building my 4.6 for the blower.

Also, will the Procharger blower bracket bolt up to the 5.4? I know that the deck is slightly taller.. but, I'm not sure if the mounting locations are still in the same spot on the 5.4 versus the 4.6. What about Alternator, and accessories?

Thanks!

Travis

 

[Trav4011]

anyone?

 

[bert96]

check www.reichardracing.com for adapter plates.

 

[y2kstang grl]

Check the newest 5.0 magazine. I know there was an ad in there for one and it was near the front.

 

[04YELLOWGT]

The only thing you need to realize is that the Ls still dont have forged internals. So you will still be limited.

 

[billfisher]

get a 5.4 3v. they hold 425 rwhp with stock internales and <6000 rpm. at least so far.