• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

A few cooling system Q's

  • Thread starter Thread starter Green_Meanie
  • Start date Start date May 1, 2004
G

Green_Meanie

New Member
Mar 11, 2004
161
0
0
May 1, 2004
#1
  • May 1, 2004
  • #1
I am in the process of replacing some cooling system components.

Here are my questions

1) Should I replace waterpump with a new high flow unit? If so which one?

2)should I keep my stock fan or run an aftermarket fan on the Fluidyne? If so which one?


Thanks.
 

S/CBlack95GT

New Member
Apr 6, 2003
2,018
0
0
Tampa Palms, FL
May 1, 2004
#2
  • May 1, 2004
  • #2
I dont know of anyone that makes a highflow bolt-on pump for the 94-95GTs. The same goes for the fan. A few companies make fans that will work, but they are not a direct bolt in. I know of one place that sells an aftermarket OEM fan replacement, but Im not sure of the company that makes it.
 

mytight95

Active Member
Apr 11, 2003
2,605
0
46
Dothan,Al
May 1, 2004
#3
  • May 1, 2004
  • #3
i don't think you will find a better fan, but with the fluidyne in my car i used a flexalite 16" fan for a long time with sufficient cooling w/o ac, so that should tell you something about the fluidyne, try to use that fan with the stock radiator
 
W

wytstang

Mustang Master
Mar 14, 2004
4,988
4
78
Summerville,SC missing South Fl. weather :(
May 1, 2004
#4
  • May 1, 2004
  • #4
The stock water pumps on our cars seem to do pretty well they have been known to cool some of these high powered ponies pretty well. But if you want a high flowing on then here you go www.stewartcomponents.com/html/products/ford/stage1.asp they make one for our cars.
 
G

Green_Meanie

New Member
Mar 11, 2004
161
0
0
May 2, 2004
#5
  • May 2, 2004
  • #5
wytstang said:
The stock water pumps on our cars seem to do pretty well they have been known to cool some of these high powered ponies pretty well. But if you want a high flowing on then here you go www.stewartcomponents.com/html/products/ford/stage1.asp they make one for our cars.
Click to expand...

Cool, thanks, thats what I wanted.
 
You must log in or register to reply here.

Similar threads

S
Preparation for Holley Terminator X install – Foxbody 306 (electrical fan, alternator, MSD Ignition, etc)
  • So_Flo
  • Mar 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 4, 2026
General karthief
Engine Which cooling part first?
  • Dontknowchit
  • May 8, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
35
Views
1K
Fox 5.0 Mustang Tech May 15, 2025
90trunk
Radio, Speaker Upgrades
  • TripleYellow
  • Apr 24, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
104
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 24, 2026
TripleYellow
B
Saying Hi
  • BriansNSane
  • Dec 20, 2025
  • The Welcome Wagon
Replies
5
Views
272
The Welcome Wagon Dec 21, 2025
BriansNSane
B
M
Alternator
  • Mustang_monster626
  • Jun 5, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
242
1965 - 1973 Classic Mustangs -General/Talk- Jun 16, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?