Mach 1 A little info on the Mach 1

F

FSTENUF

New Member

Jan 20, 2009

3

0

0

Jan 20, 2009

#1

• Jan 20, 2009

• #1

Hey guys whats happening? I have not owned a Mustang in a long time. The last one I had was a 97 Cobra. I have been looking around and have found a 03 Mach 1 that I'm interested in. Its a very badass blue color it has a 5 speed with black leather interior. It has the 6 disc in dash changer and it only has 24k on the clock. It has a Steeda CAI and what I believe to be Flowmaster exhaust but other than that its stock. I can buy it for $14,225. Is that a good price? I test drove it today and it ran very strong and shifted very well. I love the color! It also has black rims that look like FR500's but they have a chrome lip. Are there any things that are notorious about these cars? I want to put a Whipple or KB on what ever I buy because I love the sound they make. Are these motors good canidates for this upgrade or am I better off with a 96-99 Cobra or maybe even a GT? What are the stock rwhp #'s for these cars? Thanks guys for helping out a newbie.

 

Crzyhrse

Active Member

Dec 23, 2004

0

2

38

Seattle, WA

Jan 20, 2009

#2

• Jan 20, 2009

• #2

That sounds like a very good price to me. The two most known problems are synchro problems with 1-2, 2-3 shifts, and the famous head tick. Both problems probably have already been fixed, or they never happened on the car at all. I've never had either problem. Stock dyno numbers for a 5 speed is 275-282rwhp. Their are plenty of blown Machs, but as to what supercharger works best for the Mach I'm not sure. Procharger is used quite abit I've noticed.

 

F

FSTENUF

New Member

Jan 20, 2009

3

0

0

Jan 20, 2009

#3

• Jan 20, 2009

• #3

Thanks alot man.

 

Mach1Run

New Member

Jun 25, 2004

333

2

0

Wylie, Texas

Jan 21, 2009

#4

• Jan 21, 2009

• #4

The KB / Whipple style sc tends to be the more expensive route, alot of folks go with the procharger style sc for a variety of reasons. If you're good on CL or Ebay then you can always go the eaton swap route. The 3650 trans in the standard can be hit or miss and since its used there is a chance that it has been in the shop for that TSB already.

try the mach1registry.com for more specific / detailed info.

 

F

FSTENUF

New Member

Jan 20, 2009

3

0

0

Jan 21, 2009

#5

• Jan 21, 2009

• #5

I was thinking of doing the eaton swap. Do you have to use the blower off a Cobra or can it be off a Lightning?

 

Mach1Run

New Member

Jun 25, 2004

333

2

0

Wylie, Texas

Jan 23, 2009

#6

• Jan 23, 2009

• #6

I believe the big parts needed for the eaton swap are the termi lower intake, eaton itself, timing cover, and intercooler, then you need lots of smaller bits you can pick up here and there. I dont know anything about lightnings, so couldnt tell you if thats do-able.

 

EXTRPR50

Founding Member

Oct 7, 1998

370

1

19

Feb 17, 2009

#7

• Feb 17, 2009

• #7

If you are new to blowers then you may not know that the Mach engines have a higher compression ratio than normal, is it 10:1 guys?
Anyhoo, you may not be able to run high levels of boost with the stock ratio, just in case you did'nt know..

 

A

anthonysmach

New Member

Mar 11, 2009

2

0

0

San Diego

Mar 12, 2009

#8

• Mar 12, 2009

• #8

If you are looking into power adders, with the high-ish compression the Mach 1 motor has you should go for no more than 450-475rwhp. Blowers offered by Paxton, Whipple, Procharger, and even the weaker Eaton and Roushchargers all are in the safe range. If you are looking at any of the larger KB blowers say 2.2L or above, then you will have to replace a lot of internals (forged)

Just my 2 cents i was thinking of supercharging, and i have the same exact mach as you are looking at, with 32k miles...pretty decent deal by the way.

The fr500 rims will say Ford Racing on them if they are real, no big deal if they are not

 

smitty1991

Member

Mar 22, 2008

89

8

9

iowa

Mar 14, 2009

#9

• Mar 14, 2009

• #9

blower

if you are interisted in doing an eaton swap expect to spend around 2k to 3k. if you go to 2003-2004 Ford Mustang Mach 1 Owner's Club & Registry Website there are complete forums with step by step instructions and pics of install, along with all the part numbers you will need.

 

B

BillgoCU

New Member

Apr 15, 2009

5

0

0

Apr 15, 2009

#10

• Apr 15, 2009

• #10

Its a good price! I've owned an 04 Mach1 since new, and they are fun cars.

 

D

DANIEL 04 MACH1

New Member

Jul 20, 2009

2

0

0

Jul 20, 2009

#11

• Jul 20, 2009

• #11

does anybody know if 03 04 corba diablo programmer can be used for a 04 mach 1 because i got a mach1 and found a good deal on a used diablo programmer but it was used on a 04 cobra if anybody knows please reply on here thanks

 

O

oh9mustang

Banned

Jul 27, 2008

138

0

0

Jul 29, 2009

#12

• Jul 29, 2009

• #12

The Autos have a cast iron Block. The 5 speeds have an aluminum block.

 

Crzyhrse

Active Member

Dec 23, 2004

0

2

38

Seattle, WA

Jul 29, 2009

#13

• Jul 29, 2009

• #13

oh9mustang said:

The Autos have a cast iron Block. The 5 speeds have an aluminum block.

Click to expand...

Wrong. Both have an aluminum block. The Auto has a cast crank, the 5 speed a forged crank. The '03-'04 Cobra has an iron block.

 

twogts4us

15 Year Member

Apr 1, 2004

4,188

12

79

Dunedin, FL

Jul 30, 2009

#14

• Jul 30, 2009

• #14

DANIEL 04 MACH1 said:

does anybody know if 03 04 corba diablo programmer can be used for a 04 mach 1 because i got a mach1 and found a good deal on a used diablo programmer but it was used on a 04 cobra if anybody knows please reply on here thanks

Click to expand...

No, a Diablo tuner for the 03-04 Cobra will not work on the 03-04 Mach 1. Sorry!

 

LaserSVT

Got FB banned again for saying nards

Founding Member

Nov 29, 1999

9,391

3,538

233

Aug 2, 2009

#15

• Aug 2, 2009

• #15

oh9mustang said:

The Autos have a cast iron Block. The 5 speeds have an aluminum block.

Click to expand...

Wrong.

Crzyhrse said:

Wrong. Both have an aluminum block. The Auto has a cast crank, the 5 speed a forged crank. The '03-'04 Cobra has an iron block.

Click to expand...

Right.