A9l conversion removal... Please help!

[red50]

Hi all,
Here is my dilemna... I bought my stang with the A9L conversion already installed. Since then i have rebuilt the motor and added a charger. I want to use a tweecer to tune but think i am running into problems because of the A9L that i am plugging the tweecer into. It seems that the original computer is still in the car but the A9l that sits on the passenger side floor is kind of hacked into the Wiring. It is quite a mess and I am afraid to mess with any of the wiring. Anyone here know what the A9L conversion entails or how i can remove it?

Thanks,
Darren

 

[wytstang]

The a9l conversion is done by moving some pin locations to work (rewiring). You have to find out what pins were moved and move them back.

 

[Stangfreak95]

I've never heard of using/hacking 2 computers at the same time. If I were you I would only use the a9L.

I have some kind of file that shows you what pin that you need to remove/use to do the computer swap. Give me your email adress if you want me to send it to you.

 

[red50]

I've never heard of using/hacking 2 computers at the same time. If I were you I would only use the a9L.

I have some kind of file that shows you what pin that you need to remove/use to do the computer swap. Give me your email adress if you want me to send it to you.

I will send u a pm with my email A pinout would be a great help.

Thanks

 

[Stangfreak95]

I will send u a pm with my email A pinout would be a great help.

Thanks

Sent