• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

about to run against some ricers, need some help on launching

  • Thread starter Thread starter DerekStangGT
  • Start date Start date Jan 23, 2004
  • 1
  • 2
Next
1 of 2 Next Last
D

DerekStangGT

My package is in the mail!
Feb 18, 2003
1,068
0
36
Jan 23, 2004
#1
  • Jan 23, 2004
  • #1
ok, my friend set up some races for me against some ricers he knows. there will be an Accord (which i know is basically stock), some Integras (dont know what they have), and maybe an RSX (dont know his mods either). so my only concern is hooking up and getting out of the hole. does someone have any advice for launching on factory rubber? i know i can take them if i just dont spin.

and for those wondering, this will be done at an old abandoned shcool where no one ever hangs out, except to race.
 

edcar01gt

New Member
Jan 6, 2003
327
0
0
san antonio, tx
Jan 23, 2004
#2
  • Jan 23, 2004
  • #2
Dude why even worry if they get you at the line...you're gonna fly right by them by the time you hit second gear. Then they'll be
 
D

DerekStangGT

My package is in the mail!
Feb 18, 2003
1,068
0
36
Jan 23, 2004
#3
  • Jan 23, 2004
  • #3
edcar01gt said:
Dude why even worry if they get you at the line...you're gonna fly right by them by the time you hit second gear. Then they'll be
Click to expand...

i know, but what if one of them has similiar hp or even a 50-75 shot of juice. i just want to be sure, plus i'd rather win by a lot over just winning. i want them to have no arguments like "i screwed up, i could have had you. it was so close"
 

kj99

Founding Member
Sep 2, 1999
346
0
0
Spartanburg SC
Jan 23, 2004
#4
  • Jan 23, 2004
  • #4
Just feather the gas just enough to where you can feel your tires just barely start to spin. or just take off from idle, then hammer thru the gears hard.

I don't think you will have any problems with these cars though. .02


How worn are your tires right now? Thats the key.
 

JonJon

Founding Member
Aug 16, 2002
4,801
1
68
back in Marylands
Jan 23, 2004
#5
  • Jan 23, 2004
  • #5
kj99 said:
Just feather the gas just enough to where you can feel your tires just barely start to spin. or just take off from idle, then hammer thru the gears hard.
Click to expand...
 
J

jmichalicek

Founding Member
Apr 27, 2002
274
0
0
Richmond, Va
Jan 23, 2004
#6
  • Jan 23, 2004
  • #6
kj99 is right on the launch there. But yes, you should have no trouble with them. The accord is of course nothing to worry about. The RSX I suppose could be trouble if it's pretty well modded, but I have taken stock RSXes in the '94 SHO in my sig and your car would stomp that thing.
 
D

DerekStangGT

My package is in the mail!
Feb 18, 2003
1,068
0
36
Jan 23, 2004
#7
  • Jan 23, 2004
  • #7
kj99 said:
Just feather the gas just enough to where you can feel your tires just barely start to spin. or just take off from idle, then hammer thru the gears hard.

I don't think you will have any problems with these cars though. .02


How worn are your tires right now? Thats the key.
Click to expand...

my tires are kinda worn. although, i just had my tires rotated!! yepee!! i just remembered that! i should be ok on tread. but i probably dont need a burnout before the race since im on street tires, right? also, should i rev to about 3k rpms and slip the clutch? or should i rev lower, ~1700 and slip it almost as fast as a dump? i dont really launch too much so i suck at it.
 
H

Highroller

Founding Member
Oct 18, 2002
320
0
0
Vegas
Jan 23, 2004
#8
  • Jan 23, 2004
  • #8
I would take off like you do from a stop light.. then ease into it.. don't worry if there alittle ahead of you... if you panic and step on it you will blow off tire and they will put more distance on you..

Just take it easy out of the whole and ease into it.. quick shifts... (don't take your foot off the gas the whole time and you will catch em... or you should..
 

stangman

15 Year Member
Jul 10, 2003
2,690
10
69
in a 3 bed, 2 bath
Jan 23, 2004
#9
  • Jan 23, 2004
  • #9
not to be a jerk or anything, but just go practice. that's the best way to find out what works for you. go find a empty parking lot, or deserted back road & practice launching. we can all tell you what to do, but actually doing it is completely different.
btw - the reason i say most of this is, i really couldn't tell you how to launch. i just learned by praticing. & i took a wrx off the line last night that was launching at 4500 (supposedly)
 

95Stang50

New Member
Mar 17, 2003
83
0
0
Wellesley Ma
Jan 23, 2004
#10
  • Jan 23, 2004
  • #10
i agree with what was just stated, its all up to you and how you like to launch. for me i like to launch at like 2500 on the street with street tires and just feather the clutch. seems to work best for me. but i would say just go out and practice, thats the only way you are going to know for sure.
 
D

DerekStangGT

My package is in the mail!
Feb 18, 2003
1,068
0
36
Jan 23, 2004
#11
  • Jan 23, 2004
  • #11
c2see21 said:
not to be a jerk or anything, but just go practice. that's the best way to find out what works for you. go find a empty parking lot, or deserted back road & practice launching. we can all tell you what to do, but actually doing it is completely different.
btw - the reason i say most of this is, i really couldn't tell you how to launch. i just learned by praticing. & i took a wrx off the line last night that was launching at 4500 (supposedly)
Click to expand...

i agree with you, and it is good advice, however im going out in about 3 hours, so i dont have a lot of time to go practice. thanks for the help tho
 

stangman

15 Year Member
Jul 10, 2003
2,690
10
69
in a 3 bed, 2 bath
Jan 23, 2004
#12
  • Jan 23, 2004
  • #12
DerekStangGT said:
i agree with you, and it is good advice, however im going out in about 3 hours, so i dont have a lot of time to go practice. thanks for the help tho
Click to expand...


well with the competition your up against, just don't get all tense at the launch & you should be alright. just don't try to over do it, you'll be sure to boil the tires if you try stuff you haven't done before
 
B

Ben99GT

Founding Member
Nov 3, 2002
76
0
6
MS Gulf Coast
Jan 23, 2004
#13
  • Jan 23, 2004
  • #13
I had a really hard time hooking up with 4.10s and new-ish Gatorbacks. Like anything past 3/4 throttle at any point in 1st and it was like being on ice. I don't know if you're traction problems are that bad or not?

Order some Nittos and school them.

I hear alot of guys saying the RSX Type-S's run decent but every one I've ever raced has been a dog and I watch them run mid - low 15s at the track all the time. I'm sure a good driver can get a high 14 in a Type S but by the same token a good driver can get a stock '99-up into the high 13s.
 

StangLou

Active Member
Jul 9, 2003
1,264
0
36
Holly Springs, NC
Jan 23, 2004
#14
  • Jan 23, 2004
  • #14
all you need to do on stock rubber is haze the tires. as for launching, just practice before hand
also, if you want to launch kinda hard, tach it to around 3000 then just slip the clutch quickly and youll hook after a rotation or two of the tires and be off to fry some rice .
 
G

GinoGT

Founding Member
Aug 11, 2002
1,862
0
36
Jan 23, 2004
#15
  • Jan 23, 2004
  • #15
Personally, I wouldn't be too worried about nailing a perfect launch based on that competition. If you were racing an LS1, then I'd say don't be anything short of pefect just to limit how bad you lose. Just get off the line reasonably quick and you'll be fine.
 

stangman

15 Year Member
Jul 10, 2003
2,690
10
69
in a 3 bed, 2 bath
Jan 24, 2004
#16
  • Jan 24, 2004
  • #16
GinoGT said:
If you were racing an LS1, then I'd say don't be anything short of pefect just to limit how bad you lose
Click to expand...


you can beat them too just depends on drivers (i have a few witnesses to attest to it )
 

Boss281Mustang

New Member
Nov 6, 2003
17
0
0
Huntington, WV
Jan 24, 2004
#17
  • Jan 24, 2004
  • #17
c2see21 said:
you can beat them too just depends on drivers (i have a few witnesses to attest to it )
Click to expand...

Sigh, it's true. We had cooked firebird for dinner tonight...
 

neoclasiccl

Founding Member
Jun 1, 2002
3,043
0
57
Help I can't see !!!!!!
Jan 24, 2004
#18
  • Jan 24, 2004
  • #18
Follow the posts above reguarding your launch. But just remember there are some ricers out there that you need to watch out for. My friend in his 2002 Z06 got beat by 10 cars on the highway here in Jacksonville by a Honda Civic.
 

stangman

15 Year Member
Jul 10, 2003
2,690
10
69
in a 3 bed, 2 bath
Jan 24, 2004
#19
  • Jan 24, 2004
  • #19
neoclasiccl said:
Follow the posts above reguarding your launch. But just remember there are some ricers out there that you need to watch out for. My friend in his 2002 Z06 got beat by 10 cars on the highway here in Jacksonville by a Honda Civic.
Click to expand...



ewwe...... that makes me cringe just hearing that story i respect all types of cars, but some things just don't seem right
 

red ink

Founding Member
Apr 8, 2002
746
1
0
Arizona
Jan 24, 2004
#20
  • Jan 24, 2004
  • #20
Have u guys looked at his sig? 4.10 gears with stock tires is gonna kill him on the launch. How about rev it up to 4k and dump the clutch in 2nd?
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

0
V6 to V8 Swap info
  • 02_2v_Curtis
  • Jan 11, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
734
1996 - 2004 SN95 Mustang -General/Talk- Jan 11, 2026
02_2v_Curtis
0
2001 Mustang GT -- Valve Assembly Pressure Regulator Solution Found!
  • SN95_fanx54
  • Aug 17, 2024
  • SN95 4.6L Mustang Tech
Replies
7
Views
3K
SN95 4.6L Mustang Tech Oct 23, 2025
Noobz347
Drivetrain Manual Shifter moves up and down some.
  • R82148V
  • Jun 12, 2023
  • Fox 5.0 Mustang Tech
  • 2
Replies
27
Views
5K
Fox 5.0 Mustang Tech Aug 28, 2023
R82148V
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
517
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
2
Bought an engine for my project
  • 2stroke1971
  • Jul 7, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 9, 2024
limp
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?