• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

ac/heater expertise please

  • Thread starter Thread starter wazazzle
  • Start date Start date Sep 1, 2005
W

wazazzle

New Member
Mar 30, 2005
618
1
0
In the dumpster behind McDonalds. WA
Sep 1, 2005
#1
  • Sep 1, 2005
  • #1
ok, im having a bit of a problem with this. searched and read some people say if there's a break in the ac syst. moisture ruins the ac accumulator/drier and you need a new one----is this true??? 2nd question is--how do i get the bottom silver connector off the evap core--do i need a special tool??. thanks
 

PuterAmI

Member
Mar 29, 2003
513
0
16
Madison, Alabama
Sep 1, 2005
#2
  • Sep 1, 2005
  • #2
wazazzle said:
ok, im having a bit of a problem with this. searched and read some people say if there's a break in the ac syst. moisture ruins the ac accumulator/drier and you need a new one----is this true??? 2nd question is--how do i get the bottom silver connector off the evap core--do i need a special tool??. thanks
Click to expand...
1) Yes. The desiccant (yes, I spelled it right) becomes saturated from the ambient moisture in the air and cannot absorb anymore. You can get new ones at a decent price from acsource.net.
2) Same tools that you use to disconnect the fuel lines. Any auto parts place will sell them. I bought a plastic assortment from Autozone for about $3. Title is "A/C and Fuel Line Disconnect Tools".
 

bubba-dough

Active Member
Dec 28, 2004
1,044
2
38
Indiana
Sep 1, 2005
#3
  • Sep 1, 2005
  • #3
PuterAmI said:
1) Yes. The desiccant (yes, I spelled it right) becomes saturated from the ambient moisture in the air and cannot absorb anymore. You can get new ones at a decent price from acsource.net.
2) Same tools that you use to disconnect the fuel lines. Any auto parts place will sell them. I bought a plastic assortment from Autozone for about $3. Title is "A/C and Fuel Line Disconnect Tools".
Click to expand...
I agree....but it should be ok if you are just doing a repair and it isn't disconnected for too long and you cap the ends. Also sometimes the spring inside the springlock gets corroded and doesn't want to roll off the flare of the female springlock, don't worry it will work loose after a little finesse. Also replace all the o-rings before re-assembly. Good Luck........
 
You must log in or register to reply here.

Similar threads

M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
741
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
M
2001 evap/heater core questions
  • mnky99
  • Sep 3, 2025
  • SN95 V6 Mustang Tech
Replies
3
Views
421
SN95 V6 Mustang Tech Sep 3, 2025
mnky99
M
M
2001 v6 heater hose quick connect question
  • mnky99
  • Sep 24, 2025
  • SN95 V6 Mustang Tech
Replies
8
Views
812
SN95 V6 Mustang Tech Sep 26, 2025
mnky99
M
M
2001 v6 heater return pipe leak question
  • mnky99
  • Nov 11, 2025
  • SN95 V6 Mustang Tech
Replies
1
Views
392
SN95 V6 Mustang Tech Nov 11, 2025
mnky99
M
E
Finished my Fox Hydroboost Install - Tips
  • Engineer Duane
  • Apr 9, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 5, 2025
Engineer Duane
E
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?