adjust idle ??

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
I was tinkering with my car today I cleaned the throttle blade and sprayed some seafoam in there and let it sit for a bit and ran it....worked good but my idle was a little higher than before so I tried backing out the throttle stop screw to let the blade close a bit more...cant get it to idle under 1100 rpm's
 
unplug your IAC, set your idle at 600 rpms with the screw... shut the car off, plug in the IAC, set your tps voltage to .99 and disconnect battery to reset the computer.

that should do it.

just simply turning the screw hurts more than helps. if you open the blade with the screw, the car thinks its revving slightly, it doesnt know its idling, so you must set the TPS so the car knows its idling rather than a smal smal rev..

i think thats how it work i am not sure, someone correct me if i am wrong...
 
The TPS is zeroed out when the engine is started. The adjusting the TPS is mostly a RICER myth. There ARE cases when the TPS has to be ADAPTED. IMHO, anyone that says "ADJUST the TPS" obviously does NOT have an engineering degree and/or they have horrible grammar/English skills.

See:
http://www.veryuseful.com/mustang/tech/engine/Mustang-TPS-FAQ.html

The QUICK summary:
You never have to adjust a Ford TPS unit on a Ford TB (that has the idle set to spec)- NEVER!!
For people that adjust their idle higher than spec to keep their engine running with their setup, or people that use a NON-Ford TPS, then they may have to adapt the TPS unit (by making slots) so that it reads from ~0.6v to ~1.1v at idle.
 
The odds are that you have a vacuum leak.

Adjusting the TPS to .99 or higher may increase your idle speed to a higher RPM. In my personal experimenting, there was an increase from 650-750 to 1000 RPM. The increase was not due to a change the mechanical position of the throttle butteryfly.

See "Help me create the Surging Idle Checklist" at http://forums.stangnet.com/showthread.php?t=534062
for help with your idle problems. The first post contains all the updates to the fixes. I continue to update it as more people post fixes or ask questions.