Adjusting valves question?

[69clark]

Okay, last year, I built the motor in my car, as most of you know. When I put everything together, I adjusted the valves as instucted. My question is that I put 2000 miles on the motor now and I am wondering if I need to readjust the valves. I am running hyd. roller lifters and roller rockers, I know that when you run hyd roller lifters you don't need to readjust them like you do with solid lifters. But being that I went throught break in and all the parts where new, should do it again or should they still be good to go?

:SNSign:

 

[mo_dingo]

nawww

 

[trav_19]

unless your noticing a noise i wouldn't be too worried about it

 

[reddy351]

+1. If they are not making noise, you are fine. If they are, re-adjust them. They shouldn't need periodic maintenance, like the old solid lifters did.

 

[go-stang5.0]

Yea what they said. Do you want to adjust them for the sake of adjusting them or do you actually hear something ticking from the motor?