Advice on a Good Built Block (302/306/331/347)

Manewaymja2 · Jan 12, 2010

Hey Guys,
I already have a Thread on here asking about what cubic inch to go with on my Bottom end. Well I have deceided to buy a built Short Block for my Top End.

The Run Down: Heads Performer 6037 Heads, Performer Intake, hardened pushrods, 1.6 Pedestal Mount Rockers. Now i want to spray this motor with at least 150 Shot Nitrous with a wet kit. Can you guys recommend a good built Short Block (Builders - Shops - Online Stores etc) out there for me to purchase one, any where in the range from a 302 -347 would be good.

Thanks Matt

tannerc91gt · Jan 12, 2010

Manewaymja2 said:
Hey Guys,
I already have a Thread on here asking about what cubic inch to go with on my Bottom end. Well I have deceided to buy a built Short Block for my Top End.

The Run Down: Heads Performer 6037 Heads, Performer Intake, hardened pushrods, 1.6 Pedestal Mount Rockers. Now i want to spray this motor with at least 150 Shot Nitrous with a wet kit. Can you guys recommend a good built Short Block (Builders - Shops - Online Stores etc) out there for me to purchase one, any where in the range from a 302 -347 would be good.

Thanks Matt

www,fordstrokers.com if youre looking for a 331-347 short block

if youre just going to get a block, you may try DSS

Manewaymja2 · Jan 12, 2010

Will be looking for a complete Short Block. Blanced ets.

Thanks tannerc91gt, are there any others you recomend?

tannerc91gt · Jan 12, 2010

just contact woody at fordstrokers.com, let him know what youre looking for and you'll be good to go. You wont hear anyone have anything bad to say about him from what ive seen.

Manewaymja2 · Jan 12, 2010

Hey where are they located?????

tannerc91gt · Jan 12, 2010

about an hour west of chicago

stykthyn · Jan 12, 2010

coast high performance. they are in Torrence California. They cost a bit more but its worth every penny.

Tanus · Jan 12, 2010

stykthyn said:
coast high performance. they are in Torrence California. They cost a bit more but its worth every penny.

my buddy is on his 3rd engine from them, first one lasted a month, second about 6 months, third a couple years but he doesnt really drive it anymore. BUT! this could be no fault of CHP and simply be attributed to the fact he graduated from UTI, haha (Universally Trained Idiots)

Manewaymja2 · Jan 12, 2010

maybe you guys can help me with my other post,

Compression pressure on a stock 302????????????

SpartaPerformance · Jan 12, 2010

I had a D.S.S. short block it was excellent, or you can try the 347 from FRPP M-6009-Z347

Trbofox · Jan 12, 2010

Ford strokers is 12 weeks out. I've had 2 DSS motors, both sucessful, one of which has been alive for 7 years making my posted numbers with the turbo. I guess I'll go with them again with another 331, but the Boss block this time around.

Mr. Rustypwnz · Jan 12, 2010

long rod 306

tannerc91gt · Jan 12, 2010

Trbofox said:
Ford strokers is 12 weeks out. I've had 2 DSS motors, both sucessful, one of which has been alive for 7 years making my posted numbers with the turbo. I guess I'll go with them again with another 331, but the Boss block this time around.

a lot of people seem to hate DSS. friend of mine went 9.9x on a DSS race prepped block, seems to me like they machine some good stuff.

Shaolin Crane · Jan 13, 2010

stykthyn said:
coast high performance. they are in Torrence California. They cost a bit more but its worth every penny.

hmmm sounds like the same company i used... oh thats cause i did

Shaolin Crane · Jan 13, 2010

Tanus said:
my buddy is on his 3rd engine from them, first one lasted a month, second about 6 months, third a couple years but he doesnt really drive it anymore. BUT! this could be no fault of CHP and simply be attributed to the fact he graduated from UTI, haha (Universally Trained Idiots)

they are local to us, i know at least 6 engines making over 700hp with parts used from them

Advice on a Good Built Block (302/306/331/347)

Manewaymja2

Member

tannerc91gt

This last 25% is foreign territory at this point

Manewaymja2

Member

tannerc91gt

This last 25% is foreign territory at this point

Manewaymja2

Member

tannerc91gt

This last 25% is foreign territory at this point

stykthyn

I want to measure mine. It doesn't look that tall.

Tanus

New Member

Manewaymja2

Member

SpartaPerformance

Trbofox

Member

Mr. Rustypwnz

Advanced Member

tannerc91gt

This last 25% is foreign territory at this point

Shaolin Crane

Banned

Shaolin Crane

Banned

Similar threads

Advice on a Good Built Block (302/306/331/347)

Member

This last 25% is foreign territory at this point

Member

This last 25% is foreign territory at this point

Member

This last 25% is foreign territory at this point

I want to measure mine. It doesn't look that tall.

New Member

Member

Member

Advanced Member

This last 25% is foreign territory at this point

Banned

Banned

Similar threads

Privacy & Transparency

Privacy & Transparency