Afew quick questions about my other mustang

[bentley429]

Well along with my 89 LX I have a 69 Mach 1 that I would like to start restoring this summer. Any ideas how much if would cost for both quater panels, trunk pans and floor pans installed? I WILL be posting pictures within afew hours. It will have the 351c 2v heads 3 speed combo in it for awhile, and just be a nice cruiser for now. Someday who knows 408 on a 200 shot with a bullet proof auto and rear is what my real plans are( years down the road ). Any input is welcome. PS I dont think this means the fox is going anywhere.

 

[Tonys96Cobra]

No idea about the body parts, but if it were mine, I would definitely keep the 351c. They are cool motors and make pretty good power without too much work.

 

[mustangjoe87]

I know that the quarters are about 80 each for replacements trunk pans and floor pans are also cheap. As for instalation that would depend on your area's rates.

 

[bentley429]

No idea about the body parts, but if it were mine, I would definitely keep the 351c. They are cool motors and make pretty good power without too much work.

I should of put that also I was considering the 351c with 4v heads, those can make some serious power.

 

[bentley429]

here is the link to some pictures http://www.putfile.com/bentley429