Aftermarket Water Temp and Oil Pressure Sending Units

[HISSIN50]

Lowes or HD will have all the stuff you need as well.

 

[revhead347]

looks good!

As for me.... I went to AZ and Advanced today.... neither had the t-fittings...Now I know they used to b/c I've done a similar thing on both of my fox stangs a few years ago and I bought them there. I have no idea why they don't carry them anymore around here. I'll have to run to a better stocked parts store tomorrow and hopefully come up w/ one.

Advance has the fittings. They are in black slide tray cases behind the parts counter. You have to ask the guy if he'll let you look through his black boxes for NPT and hose fittings.

Kurt

 

[SN95StangMan]

I got mine at the local home improvement store. I figured it was better than dealing with the clowns at AZ.

 

[StadEMS3]

Mine kept leaking with both sensors and tees. I just bought this and going to install soon, hope it works better than a bunch of fittings all up in there...


http://cgi.ebay.com/ebaymotors/ws/e...0197465638&sspagename=STRK:MEWNX:IT&viewitem=

 

[biggbronco]

Stad just an FYI, that sandwich adapter is only $29.99 with free shipping on Glow Shifts site.

 

[StadEMS3]

Stad just an FYI, that sandwich adapter is only $29.99 with free shipping on Glow Shifts site.

Doh!!! Gotta love EBay - I haven't posted my feedback yet....

I hope the adapter works, it'll still be worth it not having oil spots in garage.

 

[biggbronco]

yeah, after i saw your post i had to have one too! i currently have little fittings and stuff on mine so i can have both senders working. i too get a lot of leaking, i just cant anything tight enough in there, there's no room. i think that adapter is awesome, i bought one too, off the GS website. would've been cooler if they would offer it in anodized blue or red or even polished. I think it'll work, it's a neat design too. thanks for the tip! let me know when you get yours installed how it goes, you'll probably get yours before me.

 

[turbogt]

this is a good thread.. I have those two gauges sitting at home waiting to be installed...

My question is...... Can you run a t after a t?? I already have my factory sensor t'd because of my vortech?? I haven't opened the box or even looked at anything so I'm kinda just shootin in the dark here?

 

[HISSIN50]

this is a good thread.. I have those two gauges sitting at home waiting to be installed...

My question is...... Can you run a t after a t?? I already have my factory sensor t'd because of my vortech?? I haven't opened the box or even looked at anything so I'm kinda just shootin in the dark here?

As long as the sensor/probe is in the flow of coolant (not in a dead-end alcove), it should be fine. Like if you had your existing tee and then 6 inches later add another tee, in which you can place a sender (with coolant flowing through the Tee's body), that should be fine.

 

[StadEMS3]

if you look at the adapter I found, it has 3 ports on it. factory sender, aftermarket sender, and you wouldn't need to punch a hole in your oil pan for supercharger oil feed line. hopefuly I can mine installed soon.