I guess I went psycho-anal during the V8 swap and bought wayyyy too many pulleys. Here are some more I need help identifying what they're off of and what they'll fit. These are non-serpentine, however. See the pics! Again, thanks for all your help, guys!
#1: Harmonic Balancer pulley for a 351W with air conditioning and power steering (or whatever motor besides a 351W has a 4-bolt pulley)
#2: Can't imagine......never saw a 3-groove water pump pulley
#3: Water pump pulley for a motor without AC and PS (only an alternator)
I've got a 3 groove W/P pulley from a 70's 360/390 but it's bigger in diameter than that one. Also have 3 crank pullleys similar to that one from 70's 351W and Cleveland. Part #'s are there, you just have to remove all that paint to see them. W/P part #'s are on the front side, the crank #'s will be on the inside on the front.