air dam repair

[LockNLoad]

I have a plastic air dam on the front of my 99 GT and while i was changing the oil i noticed a small crack on the bottom. Is there a good way to fix this crack and prevent it from spreading, or will i have to buy a new one or just live with the crack? Thanks for any suggestions.

 

[olbob]

Drill a small hole at the extreme end of the crack, sand the inside well to remove all paint, wax etc., put some epoxy on it, a 2-3" long by a width that covers the crack by 1/2" or so fiberglass cloth, and smooth with more epoxy. After dry fill hole with "bondo" or smiliar product, sand and spray paint and buff out.
Bob