• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Air filter fell out of the fenderwell......

  • Thread starter Thread starter vertigasen
  • Start date Start date Mar 20, 2006
  • 1
  • 2
Next
1 of 2 Next Last

vertigasen

Active Member
Apr 28, 2004
366
18
29
Falcon, CO
Mar 20, 2006
#1
  • Mar 20, 2006
  • #1
So, I'm coming home today....just like any other day, when THUMP THUMP......
I ran over something in the road, but I didnt see anything there before the thumps. I look in the rearview mirror and what is sitting in the middle of the road, my Air Filter. I turn around and go pick it up, at least I was on a side street, and it is shreaded. I drove about 30 the mile to my house.

What should I do, should I try to drive to NAPA and see what I can pick up there? Should I just order a new one and not drive it all all for the next week. How bad it is that I drove it the mile back home?

BTW it is a BBK CAI...
 

SaleenGT2001

Well-Known Member
Jul 18, 2005
2,811
4
58
42
Four Oaks NC
Mar 20, 2006
#2
  • Mar 20, 2006
  • #2
i've run mine @ the track with no filter. it picked up 2 tenths. just drive and get a new one. as long as you dont live in a very sandy dirty place you will be fine!
 
4

40oz

Member
Jan 9, 2006
499
3
18
Minneapolis
Mar 20, 2006
#3
  • Mar 20, 2006
  • #3
if you don't HAVE to drive it, I don't see why you would. Just pick up a replacement K&N, whatever size the BBK kit uses, and don't drive the car without it. It is the height of foolishness to trash a car over a $60 part.
 

rebelleader

New Member
Mar 18, 2003
185
0
0
44
Homer Glen, Il
Mar 20, 2006
#4
  • Mar 20, 2006
  • #4
If your only ride is the stang, put a sock or nylon stocking over the CAI. Then drive to NAPA and buy a new filter
 

DisposableHero

Member
Oct 4, 2004
71
0
6
Mar 20, 2006
#5
  • Mar 20, 2006
  • #5
yeah just go to autozone or something and pick up a k&n
 

COramprat

...I can take it. I think.
20+ Year Stangneter
Mar 2, 2003
8,474
1,463
223
Sea of Tranquility
Mar 21, 2006
#6
  • Mar 21, 2006
  • #6
If you have a fenderwell CAI the over-the-counter K&N won't fit without an adapter. I bought one from Dallas Mustang taht fit my Mac CAI. Came in in about 4 days.
 

stangGT97

New Member
Dec 22, 2004
1,299
1
0
41
Boston area, MA
www.cardomain.com
Mar 21, 2006
#7
  • Mar 21, 2006
  • #7
rebelleader said:
If your only ride is the stang, put a sock or nylon stocking over the CAI. Then drive to NAPA and buy a new filter
Click to expand...

haha yeah make sure you clamp it otherwise you'll have Hanes in your engine
 

Black Stang 97

the guy on top of me is funny
Nov 11, 2004
483
0
0
40
Los Angeles, CA
Mar 21, 2006
#8
  • Mar 21, 2006
  • #8
stangGT97 said:
haha yeah make sure you clamp it otherwise you'll have Hanes in your engine
Click to expand...

 

merc123

Active Member
Jan 27, 2003
420
2
39
North GA
www.bluemustangregistry.com
Mar 21, 2006
#9
  • Mar 21, 2006
  • #9
I thought the same thing about the sock. Sucking that beast into the intake.
 

DocG

5th graders > me. They're not bant
Sep 25, 2005
8,297
1,358
194
49
Cincinnati area
Mar 21, 2006
#10
  • Mar 21, 2006
  • #10
Sorry for your luck, but this has to be one of the funniest "oops" I've read in awhile. Make sure you figure how why the hell the thing fell off in the first place, and make sure it doesn't happen again! I would drive it as little as possible, have a friend take you to get a new one. I'm assuming you're intake is sticking in your fender, all you need is something from the road flying up in there, and KABOOM! Just imagine that hot cigarette butt you see flying out of the window of the pickup truck in front of you, bouncing down the road...
 

urban96

bubb rubb says:"woo woooooo"
Founding Member
Sep 24, 2002
3,464
1
69
42
Syracuse, NY
Mar 21, 2006
#11
  • Mar 21, 2006
  • #11
measure and find out if its 3" or 3.5" then get a universal k&n
 
G

gvr4ever

New Member
Mar 15, 2006
10
0
0
Mar 21, 2006
#12
  • Mar 21, 2006
  • #12
rebelleader said:
If your only ride is the stang, put a sock or nylon stocking over the CAI. Then drive to NAPA and buy a new filter
Click to expand...

A nylon stocking has plastic in it that was made to wear, not put in a engine bay. I'd be worried about it comming part and getting in the engine.

If you have the parts still, just install your stock stuff till you can get the replacement part you need. Then, put more force on the clamp then you did during your first install.
 

DropTopPony

Noob Slayer
Founding Member
Aug 13, 2002
2,570
3
48
53
south jersey
Mar 21, 2006
#13
  • Mar 21, 2006
  • #13
I was always fearfull of that happening with my BBK cai. It never did but for the first six months i had it everytime i hit a bump i looked to see if it fell off. How long was it on? How often do you clean it? I cleaned mine every six months so I knew it was tight...try some loctite when you tighten up the new one.
 

rebelleader

New Member
Mar 18, 2003
185
0
0
44
Homer Glen, Il
Mar 21, 2006
#14
  • Mar 21, 2006
  • #14
gvr4ever said:
A nylon stocking has plastic in it that was made to wear, not put in a engine bay. I'd be worried about it comming part and getting in the engine.
Click to expand...

Well it wouldn't be in the engine bay, it would be in the fender well. And I know a stocking is made to be worn. But in this situation he just needs something to keep large particles from entering his intake while he drives to the parts store.
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Mar 21, 2006
#15
  • Mar 21, 2006
  • #15
rebelleader said:
If your only ride is the stang, put a sock or nylon stocking over the CAI. Then drive to NAPA and buy a new filter
Click to expand...
beat me to it.
 

STNG_96

Member
Sep 15, 2004
120
0
16
39
Marion, Illinois
Mar 21, 2006
#16
  • Mar 21, 2006
  • #16
if you still have your stocker, just toss that thing on real quick and go get a new one, it would only take a few minutes.
 

hotmustang331

Active Member
Apr 29, 2004
2,967
3
48
Bastrop,TX
Mar 21, 2006
#17
  • Mar 21, 2006
  • #17
Buy a JLT . I doubt the BBK is even giving you anay power vs stock lol. 150 for the JLT and 60 for a stinking fliter that may fall off again.
 

DropTopPony

Noob Slayer
Founding Member
Aug 13, 2002
2,570
3
48
53
south jersey
Mar 21, 2006
#18
  • Mar 21, 2006
  • #18
hotmustang331 said:
Buy a JLT . I doubt the BBK is even giving you anay power vs stock lol. 150 for the JLT and 60 for a stinking fliter that may fall off again.
Click to expand...
If he doesn't tighten the filter on the JLT that will fall off too!
 

propellerhead

New Member
Apr 13, 2004
1,541
0
0
"but what's with the but shots?"
www.cardomain.com
Mar 21, 2006
#19
  • Mar 21, 2006
  • #19
That's one of the reasons I got the K&N FIPK. It's easier to check on the filter.
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Mar 21, 2006
#20
  • Mar 21, 2006
  • #20
...and it's the reason I just went with a K&N drop in, into my stock airbox. That baby ain't going anywhere.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

P
2000 GT Random Power Loss
  • Pinellas50
  • Mar 9, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
314
SN95 4.6L Mustang Tech Mar 23, 2026
Pinellas50
P
Who the hell puts the wrong spark plugs in a 3.8L?
  • snowstang
  • Mar 25, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
12
Views
447
1996 - 2004 SN95 Mustang -General/Talk- Apr 3, 2026
LILCBRA
A
2001 Mustang GT, scorched metal smell and noise from trans/diff?
  • AndyE2255
  • Dec 1, 2025
  • SN95 4.6L Mustang Tech
Replies
4
Views
469
SN95 4.6L Mustang Tech Dec 28, 2025
gkomo
new :poo: box, may need to hit you guys up for 79-82 info when i fix thIs turd.
  • rednotch
  • Sep 27, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3
Replies
40
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 4, 2026
Noobz347
B
'03 GT Fuel Pump/Pressure/Delivery Issue
  • Brodach
  • Oct 21, 2025
  • SN95 4.6L Mustang Tech
Replies
8
Views
929
SN95 4.6L Mustang Tech Oct 31, 2025
gkomo
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?