Electrical Airbag Code 6 Only When Key Is Turned On

U

U8_my_wagon_dust

New Member

Sep 14, 2016

3

0

1

Sep 14, 2016

#1

• Sep 14, 2016

• #1

Hi All,
I'm having an airbag issue I could use some help with. If the key is in run position the airbag light will go out after initially coming on with all the lights then will go out and stay out. I waited several minutes to make sure the code didn't pop up again. Code 6 pops up only when the car is started. Any help will be appreciated!
Thanks!

90 lx 5.0 5spd
mostly stock
bolt ons: GT-40 upper and lower, 70mm TB and EGR spacer, full exhaust, 95 front brakes, 3 core radiator, cold air fender kit, electric fan.
IRS

 

M

Martman

Active Member

Jun 20, 2016

163

23

28

Louisville, KY

Sep 16, 2016

#2

• Sep 16, 2016

• #2

I have the same thing and I believe it is a clock spring component behind the airbag. Take a look at this post http://www.stangnet.com/mustang-forums/threads/air-bag-blink-1991-lx.817872/#post-8236943

 

U

U8_my_wagon_dust

New Member

Sep 14, 2016

3

0

1

Sep 16, 2016

#3

• Sep 16, 2016

• #3

I installed a brand new Doorman Clockspring and switched the factory plugs ends over to the Doorman. I tested the clocksprings and the values were within range. The code 6 only happens when the car is started. If you have a bad Clockspring code 6 will always be displayed car running or not (key turned to run but not engine on).

 

Last edited: Sep 16, 2016

General karthief

wonder how much it would cost to ship you a pair

Mod Dude

Aug 25, 2016

28,001

10,630

213

polk county florida

Sep 17, 2016

#4

• Sep 17, 2016

• #4

Would it be a problem with the sensor in the front of the car behind the bumper cover? Just a thought.

 

U

U8_my_wagon_dust

New Member

Sep 14, 2016

3

0

1

Sep 19, 2016

#5

• Sep 19, 2016

• #5

Not likely to be the front crash sensor as the airbag light does turn out. When the light goes out the module is satisfied the sensors are good.